Answer:
C.
Explanation:
Also, please help me in my questions tab if you can! Thank you so much
Wat are representative elements
Answer:
the representative elements are elements where the the s and p orbitals are filling. The transition elements are elements where the d orbitals (groups 3-11 on the periodic table) are filling, and the inner transition metals are the elements where the f orbitals are filling.
Explanation:
=)
what is most likely to happen during a precipitation reaction
A substance will react with oxygen to form water and carbon. ... dioxide.
Answer:
it will rain and there the other defined for precipitation snow and sleet and hail
Which of the following mixtures is best separated by the use of a separating funnel?
methane and water
ethyl ethanoate and water
ethanol and water
ethanoic acid and water
Answer:
ethyl ethanoate and water
Explanation:
At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.
Ethyl liquor and water are two miscible fluids. Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.
The answer is ethyl ethanoate and water. Hope this helps you!
Write the structural formula for a primary, a secondary, and a tertiary constitutionally isomeric alcohol of the molecular formula C5H12O.
Answer:
The structures of all isomeric alcohols of molecular formula C5H12O along with their IUPAC names are as shown.
Their classification of primary, secondary, and tertiary alcohols are -
1-pentanol -
2-pentanol -
3-pentanol
2-methylbutan-1-ol
2-methylbutan-2-ol
3-methylbutan-2-ol
3-methylbutan-1-ol
2,2-dimethylpropanol
Homologous chromosomes pair up during prophase I to form a ________________.
Fill it in PLSSSSSSSSSSSSS
i will give brainlist
What is the molar solubility of MgF2 in a 0.36 M Mg(NO3)2 solution? For MgF2, Ksp = 8.4 × 10^–8
Answer:
2.4 × 10⁻⁴ M
Explanation:
Step 1: Calculate the concentration of Mg²⁺ coming from Mg(NO₃)₂
Mg(NO₃)₂ is a strong electrolyte and the molar ratio of Mg(NO₃)₂ to Mg²⁺ is 1:1. The initial molar concentration of Mg²⁺ is 1/1 × 0.36 M = 0.36 M.
Step 2: Make an ICE chart for the solution of MgF₂
MgF₂(s) ⇄ Mg²⁺(aq) + 2 F⁻(aq)
I 0.36 0
C +S +2S
E 0.36+S 2S
The solubility product constant is:
Ksp = [Mg²⁺] × [F⁻]² = (0.36+S) × (2S)²
Since S <<< 0.36, 0.36+S ≈ 0.36.
Ksp = 0.36 × 4S² = 8.4 × 10⁻⁸
S = 2.4 × 10⁻⁴ M
For each system listed in the first column of the table below, decide (if possible) whether the change described in the second column will increase in GPS of the system, decrease S, or leave S unchanged. If you don’t have enough information to decide, check the “not enough information“ button in the last column. Note for advanced students: you may assume ideal gas and ideal solution behavior.
Answer:
For each system listed in first column of the table below, decide (if possible) whether the change described in the second column will increase the entropy S of the system, decrease S , or leave S unchanged. If you don?t have enough information to decide, check the not enough information button in the last column
What is the molar mass of 12?
Answer:
I assume your talking about carbon when you say 12 so it'd be 12 grams if you are
Explanation:
The molar mass of any substance in grams per mole is numerically equal to the mass of that substance expressed in atomic mass units.
Hope this helps you some
Draw the structure of the neutral organic product formed in the reaction. Do not draw counterions or byproducts.
Answer: Hello the reaction related to your question is missing attached below is the reaction
answer : attached below
Explanation:
The structure of the neutral organic product formed in the reaction is attached below.
The neutral organic product formed is ESTER
The reaction in the question is Anhydride on reaction with alcohol
la. A man was traveling by sie is allowed a maximum of 20kg luggage. The man
weighing 3.5kg, 15kg.2kg and 15kg
Find the excess weight of his luggage.
Express the excess weight as a percentage of the maximum weight allowed
Answer: The excess weight of the luggage is 15.5 kg and its percentage is 77.5%
Explanation:
Given values:
Maximum amount of luggage allowed = 20 kg
Amount of luggage man is carrying = [3.5 + 15 + 2 + 15] kg = 35.5 kg
Excessive weight of the luggage carried = Amount of luggage carrying - Maximum amount of luggage allowed
Excessive weight of the luggage carried = [35.5 - 20] = 15.5 kg
To calculate the percentage of excess weight, we use the equation:
[tex]\% \text{excess weight}=\frac{\text{Excess weight carried}}{\text{Maximum allowed}}\times 100[/tex]
Putting values in above equation, we get:
[tex]\% \text{excess weight}=\frac{15.5kg}{20kg}\times 100\\\\\% \text{excess weight}=77.5%[/tex]
Hence, the excess weight of the luggage is 15.5 kg and its percentage is 77.5%
Look at this picture.
Which process in the water cycle is shown in the picture?
evaporation
transpiration
condensation
precipitation
Answer:
condensation
Explanation:
the water has condensed from the gaseous form into rain drops
Answer:
precipitation
Explanation:
An infant acetaminophen suspension contains 80 mg/0.80 mL suspension. The recommended dose is 15 mg/kg body weight.
How many milliliters of this suspension should be given to an infant weighing 13 lb.
Answer:
0.8853 mL
Explanation:
First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:
13 lb * [tex]\frac{0.454kg}{1lb}[/tex] = 5.902 kgThen we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:
15 mg/kg * 5.902 kg = 88.53 mgFinally we calculate the required mL of suspension, using its concentration:
88.53 mg ÷ (80 mg/0.80 mL) = 0.8853 mLIdentify the alkene obtained on dehydration of each of the following alcohols:
a. 3-Ethyl-3-pentanol
b. 1-Propanol
c. 2-Propanol
d. 2,3,3-Trimethyl-2-butanol
Answer:
Explanation:
The information below explains how dehydration of alcohol occurs to produce alkene.
Under the influence of a catalyst, alcohol dehydrates to produce an alkene and water. To produce alkene and water, the reaction eliminates the OH group from alcohol containing the carbon atom and the hydrogen atom from a neighboring carbon atom via the same molecule.
The –OH group in alcohol contribute two(2) electrons to H+ out from the acid reagent, resulting in the formation of an alkyloxonium ion. This ion serves as an excellent leaving group, allowing a carbocation to form. The nucleophile which acts as the deprotonated acid subsequently attacks and creates a double bond with the hydrogen next to the carbocation.
You are an intermediate product of an industrial process which intends to separate iron from its ore. A well known iron ore is hematite. Which of these ores does not contain iron?
Goethite
Malachite
Siderite
Limonite
Answer:
Malachite
Explanation:
Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!
2.31 grams of KNO3 are dissolved in 4.15 g of H2O. What is the concentration of the solution in units of gKNO3/100gH2O?
Answer: The concentration of the solution is 55.66g[tex]KNO_3[/tex]/100g[tex]H_2O[/tex]
Explanation:
A solution consists of solute and solvent. A solute is defined as the component present in a smaller proportion while the solvent is defined as the component that is present in a larger proportion.
We are given:
Mass of [tex]KNO_3[/tex] = 2.31 g
Mass of water = 4.15 g
To calculate the concentration in g[tex]KNO_3[/tex]/100 g [tex]H_2O[/tex], we apply unitary method:
In 4.15 g of water, the mass of [tex]KNO_3[/tex] present is 2.31 g
So, in 100 g of water, the mass of [tex]KNO_3[/tex] present will be [tex]\frac{2.31}{4.15}\times 100=55.66g[/tex]
Hence, the concentration of the solution is 55.66g[tex]KNO_3[/tex]/100g[tex]H_2O[/tex]
the most correct definition of a chemical bond is the:
A diver exhales a bubble with volume of 250 mL at pressure of 2.4 atm and temperature of 15 C. How many gas particulate in this bubble?
Answer:
1.5x10²² particulates
Explanation:
Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:
P = 2.4 atmV = 250 mL ⇒ 250 / 1000 = 0.250 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 15 °C ⇒ 15 + 273 = 288 KWe input the given data:
2.4 atm * 0.250 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 288 KAnd solve for n:
n = 0.025 molFinally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:
0.025 mol * 6.023x10²³ particulates/mol = 1.5x10²² particulatesEmily spills concentrated sodium hydroxide solution on her lab bench. What she should do first?
Answer:
Explanation: hell noo
The earth's crust is:
made of rock
the thinnest layer
broken into large pieces called plates
all of the above
Answer:
all of the above
Explanation:
have a nice day :-)
Guys I don't know science, if you are intelligent tell me what is science
Explanation:
Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence
State three natural conditions under which plasmolysis could occur
Answer:
When the cell is placed in salt solutionWhen leave celss dryWhen cells are placed in sugar solutionExplanation:
Hope this helps
Según la cinética química para que una reacción ocurra, los átomos o moléculas deben
I. Chocar con la suficiente energía. II. Chocar con una concentración adecuada. III. Ser choques efectivos
A) Solo I.
B) Solo I y II.
C) Solo I y III.
D) Solo II y III.
E) I, II, III.
Answer:
solo I
Explanation:
Según esta teoría para que se produzca una reacción deben cumplirse tres condiciones: Las moléculas de los reactivos tienen que chocar entre sí. Estos choques deben de producirse con energía suficiente de forma que se puedan romper y formar enlaces químicos.
Calculate the molality of a 35.4 % (by mass) aqueous solution of phosphoric acid (H3PO4) (35.4 % means 35.4 g of H3PO4in 100 g of solution)
Answer:
3.6124 m/kg
Explanation:
Molality is calculated as moles of solute (mol) divided by kilogram of solvent (kg). Here, we can find these numbers by using the 35.4%, which gives us 35.4 g of H3PO4 and 100 g of solution to work with.
To go from grams to moles for the phosphoric acid, you need to find the molar mass of the compound or element and divide the grams of the compound or element by that molar mass.
Here, the molar mass for phosphoric acid is 97.9952 g/mol. The equation would look like this:
35.4 g x 1 mol / 97.9952 g = 0.3612422 mol
Next, the 100 g of solvent can easily be converted to 0.1 kg of solvent.
To find the molality, divide the moles of solute and kilograms of solution.
0.3612422 mol / 0.1 kg = 3.6124 m/kg
At STP, which gaseous sample has the same number
of molecules as 5.0 liters of O2 (g)?
A) 6.0 L of F2 (g)
C) 3.0 L of H2 (g)
B) 4.5 L of O2 (g)
D) 5.0 L of Cl2 (g)
The concentration of a solute in a solution is greater than the maximum concentration that is predicted from the solute's solubility
pasagot plizzz kung sino makasagot ng tamang sagot ibebrainliest ko
Answer:
1. B
2.B
3.B
4.C
5.C
Explanation:
I hope this help you
A can contains 375mL of soda. Using the appropriate number of significant figures, how much soda is left in the can after 308mL is poured into a glass
Answer:
[tex]V_l=67mL[/tex]
Explanation:
From the question we are told that:
Initial Volume [tex]V_1=375mL[/tex]
Final Volume [tex]V_2=308mL[/tex]
Generally the equation for Left-Over is mathematically given by
[tex]V_l=V_1-V_2[/tex]
[tex]V_l=375-308[/tex]
[tex]V_l=67mL[/tex]
What is the price coke difference between a strong and weak acid?
Explanation:
Strong acids are those that are completely ionized in body fluids, and weak acids are those that are incompletely ionized in body fluids. Hydrochloric acid (HCl) is considered a strong acid because it is present only in a completely ionized form in the body, whereas carbonic acid (H2 CO3) is a weak acid because it is ionized incompletely, and, at equilibrium, all three reactants are present in body fluids. See the reactions below.
H2 CO3 (acid)↔H+ + HCO3- (base)
MAY IT HELPS U MATE ☃️☃️
Lee y analiza a detalle el Anexo #1 de este plan de trabajo el cual habla sobre las fuentes alternativas de energía. Posteriormente con la información elabora un cartel o un cuadro sinóptico en tu cuaderno donde organices la información para darla a conocer a los miembros de tu comunidad.
Answer: el texto no es tan claro
What is its density in kilograms per cubic meter?
Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.
HOPE IT HELPS❤️
