Answer:
The second student with mass 70kg has more momentum
Explanation:
Using the formula:
p = m × v
Where;
p = momentum (kgm/s)
m = mass (kg)
v = velocity (m/s)
According to this question, two students are running in a cross country race.
Student 1 has the following; m = 60kg, v = 7m/s
Student 2 has the following; m = 70kg, v = 7m/s
Using p = mv
Student 1, p = 60 × 7 = 420 kgm/s
Student 2, p = 70 × 7 = 490 kgm/s
From the result of the above calculations, student 2 with mass 70kg has more momentum.
The radius of the large cylinder of a hydrolic press
20cm and that of the small cylinderis 5 cm. If a force of 100N is applied on the small piston Calculate the force on the large piston. if the piston of the small cylinder move through a distance of 0.4m through what distance can the large piston be raised
Answer: 1) 400N
2)1.6
Explanation:
1) 5cm = 100N of force
so
20cm=400n
2) 0.4 X 4 = 1.6
What can a nation do to improve the exchange rate of its currency?
A.
try to improve its balance of trade
B.
try to decrease its trade surplus
C.
try to lower its gross domestic product (GDP)
D.
try to export less while importing more
Answer:
A
Explanation:
balance the trades and improving them
Answer:
A:try to improve it's balance of trade
Explanation:
Pure hydrogen (H₂) is a hazardous substance. Thus, safer and more cost effective techniques have been developed to store it as a solid for shipping purposes. One such method is the reaction below, which occurs at 200 °C.
Answer: hello your question has some missing details attached below is the missing details
answer : 25.5% ( B )
Explanation:
Determine percentage yield
molar mass = 35 g/mol
mass of Li₃N(s) = 70 g
product LiH(s) = 8.0 g ( actual yield )
theoretical yield ( LiH ) = 4 * 7.95 = 31.8 g
percentage yield = actual yield * 100 / theoretical yield
= 8 * 100/31.8
= 25.5%
Why increasing the temperature of a gas would increase the volume of its container in gas law?
When the amount of gas in a container is increased, the volume increases. Lussac's law states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature.
Which of these is true for natural selection but not artificial selection?
A.Humans choose specific organisms to reproduce.
B.Competition for resources determines reproductive success.
C.Unfavorable traits decrease in frequency in a population.
D.Genetic engineering introduces new traits into a population.
Answer:
B
Explanation:
Which atom attracts electrons most strongly? br F Rb
Fluorine has the highest electronegativity in comparison to other elements therefore, the F atom attracts electrons most strongly.
What is electronegativity?The electronegativity of an atom measures the tendency of an element to attract the bonded electrons pairs towards itself. The electronegativity of an atom is determined with respect to another bonded atom.
Electronegativity can be described as a chemical property of an atom or a functional group to attract electrons toward itself. The electronegativity of an atom depends on the atomic number and the distance of valence electrons from the charged nuclei.
When two different atoms are bonded through a bond. More electronegative will attract the electron density of the bond towards itself.
As we know, the electronegativity decreases as we move down the group in the periodic table. Fluorine is the most electronegative element in the periodic table therefore, Fluorine (F) will attract the electrons toward it most strongly.
Learn more about electronegativity, here:
brainly.com/question/17762711
#SPJ6
Which of these takes place when a chemical change occurs? option 1: Bonds connecting atoms in products and reactants form. option 2: Bonds connecting atoms in products and reactants break. option 3: Bonds connecting atoms in reactants break, and bonds connecting atoms in products form. option 4: Bonds connecting atoms in reactants form, and bonds connecting atoms in products break.
Answer: Out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Explanation:
A change that leads to the change in chemical composition of a substance is called a chemical change.
For example, [tex]2NH_{3} \rightarrow N_{2} + 3H_{2}[/tex]
Here, bond between the reactant atoms nitrogen and hydrogen is broken down.
On the other hand, bond connecting the products that is [tex]N_{2}[/tex] and [tex]H_{2}[/tex] is formed.
Thus,, we can conclude that out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
sources of magnesium to plants
A curium-245 nucleus is hit with a neutron and changes as shown by the equation. Complete the equation by filling in the missing parts. 52 54 138 140 142 Xe Te Ce
The question is incomplete, the complete question is:
A curium-245 nucleus is hit with a neutron and changes as shown by the equation. Complete the equation by filling in the missing parts.
[tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{r}^{q}\textrm{p}+3_0^1\textrm{n}[/tex]
Answer: The complete equation formed is [tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{54}^{140}\textrm{Xe}+3_0^1\textrm{n}[/tex]
Explanation:
The general representation of an isotope is given as:
[rex]_Z^A\textrm{X}[/tex]
where,
A is the mass number, Z is the atomic number and X is the symbol of the element
In a nuclear reaction, total atomic number and total mass number on either side of the reaction remains the same
For the given chemical reaction:
[tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{r}^{q}\textrm{p}+3_0^1\textrm{n}[/tex]
On the reactant side:
Total atomic number = [96 + 0] = 96
Total mass number = [245 + 1] = 246
On the product side:
Total atomic number = [42 + r + 0] = 42 + r
Total mass number = [103 + q + 3] = 106 + q
Calculating for 'r' and 'q', we get:
[tex]96= 42 + r\\\\r=96-42=54[/tex]
[tex]246 = 106+q\\\\q=246-106=140[/tex]
Thus, the missing isotope is [tex]_{54}^{140}\textrm{Xe}[/tex]
Hence, the complete equation formed is [tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{54}^{140}\textrm{Xe}+3_0^1\textrm{n}[/tex]
Answer: try 140 52 xe
Explanation:
The skin has and needs natural oils. Why is it advisable
to wear gloves while working with strong alkalis ?
Answer:
As we know that alkalis react with oil to form soap. As our skin contains oil so when we touch strong alkalis, a reaction takes place and the soapy solution is formed. Hence we should wear gloves.
Answer:
As we know that alkalis react with oil to form soap. As our skin contains oil so when we touch strong alkalis, a reaction takes place and the soapy solution is formed. Hence we should wear gloves.
Explanation:
it from internet
Which has more molecules in it 10g H, 0 or 10g NaCl*
A)010g of H0
B)10g of NaCl
C)They have the same number of molecules
D)Cannot be determined
Answer:
10 grams of hydrogen
Explanation:
If 0.654 g of oxygen dissolves in 1.5 L of water at 1.65 atm, at what pressure (in atm) would you be able to dissolve 1.35 g in the same amount of water?
Explanation:
dylalove464
06/11/2020
Hello,
In this case, we first compute the moles of oxygen in 0.654 g and 1.35 g by using its molar mass (32 g/mol):
Then, by using the ideal gas equation at the both states, given the same both temperature and volume:
We compute the volume at the second moles:
Best regards.
Answer:
3.41
Explanation:
:)
The solubility of gases in liquids The solubility of gases in liquids increases as temperature increases and increases as pressure increases. increases as temperature increases and decreases as pressure increases. decreases as temperature increases and decreases as pressure increases. decreases as temperature increases and increases as pressure increases. is independent of temperature and increases as pressure increases.
Answer:
As the kinetic energy of the gaseous solute increases, its molecules have a greater tendency to escape the attraction of the solvent molecules and return to the gas phase. Therefore, the solubility of a gas decreases as the temperature increases.
Explanation:
As the kinetic energy of the gaseous solute increases, its molecules have a greater tendency to escape the attraction of the solvent molecules and return to the gas phase. Therefore, the solubility of a gas decreases as the temperature increases
Read the following graduated cylinder.
How many ML?
Answer:
12.8 mL
Explanation:
the bolded bar indicates a count of 5. counting from there would add up to 8/10ths of a mL.
2. Which element below would be the best choice when creating a covalent molecule with an
Oxygen atom?
A. Na
B. Mg
C. Ne
D. O
NEED HELP ASAP PLEASE
Identify the type of bonding, covalent, ionic, or metallic, between
the atoms in an oxygen molecule.
Answer:
here hope it helps
Explanation:
covalent bonds
The formula for calclum chloride Is CaCl2. Which argument best describes the type of chemical bond that was formed between the calcium and chlorine atoms? An lonic bond because calcium is sharing its electrons with the chlorine. A covalent bond because calclum is transferring its electrons to the chlorine. A covalent bond because calcium is sharing its electrons with the chlorine. An lonic bond because calcium is transferring Its electrons to the chlorine.
Answer:
An lonic bond because calcium is transferring Its electrons to the chlorine.
Explanation:
Metals usually form compounds with non-metals through ionic bonding.
Metals are electropositive elements which form ions by the loss of electrons, whereas non-metals are electronegative elements which form ions by the gain of electrons.
Compounds are formed when two or more elements combine together. The formation of compounds involves formation of bonds which may be either ionic or covalent bonds.
The type of bonding that exists between the a metallic calcium atoms and non-metallic chlorine atoms in calcium chloride, CaCl₂, is ionic bonding. In the process of formation of the compound, calcium atoms which have a valency of 2 readily donates their two valence electrons to chlorine atoms to form calcium ions, Ca²+. Each chlorine atoms having a valency of 1 accepts an electron to form chloride ions Cl-. Two chlorine atoms accept the two electrons donated by a calcium ion. Due to strong electrostatic forces of attraction between the calcium ion and the two chloride ions, the ionic compound CaCl₂ is formed.
Al2S3 + 6H20 + 2Al(OH)2 + 3H2S
How many TOTAL number mole to mole ratios will there be total?
Answer:
the correct answer is 23:19
A certain atom has a mass of 16 and an atomic number of 7. What element is this ?
Answer:
Nitrogen
Explanation:
According to the Periodic Table, the atom with a mass is 16 but the Atomic number is 7 for Nitrogen. That means that Nitrogen is an isotope.
Find the area of the sector with a central angel of 120 and a radius of 8 inshces. Leave in terms of pie
Answer:
A = 66.98 square in.
Explanation:
The Area of a sector is given by the formula
[tex]A = \frac{\theta}{360}\times \pi r^2[/tex]
here θ is the central angle and r is the radius
given that θ = 120° and radius = 8 inches
[tex]A = \frac{120}{360}\times3.14\times 8^2[/tex]
A = 66.98 square in.
Additional Activities
Direction: Sharpen your understanding in projectile motion. Calculate the maximum height reached and the horizontal range of the given launched angles and initial velocity of a projectile. You may opt to use the Projectile Motion Simulation with Air Friction by AERDEMIR which can be downloaded via Play Store for free.
1. To use the simulator, set the given values as shown in the left.
Start Angle = Launched Angle = refer to the table Start Velocity = Initial Velocity = 20 m/s
Change the gravitational acceleration to 9.8 only Delete the values in Air Density and Drag Coefficient
2. Deactivate the friction force by tapping the icon indicated in the above image.
The maximum height of an object, given the initial launch angle and initial velocity is found with:
h = v2 is in2θi 2g
h = v i 2 sin 2 θ i 2 g.
A neutron collides with a nitrogen atom, resulting in a transmutation. Balance the equation.
on + '
NX+1H
Identify the unknown product by identifying the unknown letters.
Ais
Z is
X is
Answer:
The answer is ¹³₆C
Explanation:
searched it up
Calculate weight of anhydrous compound from remains upon dehydration of 2g copper sulphate pentahydrate
Answer:
1.28 g
Explanation:
Mass of anhydrous compound/molar mass of anhydrous compound = mass of hydrated compound/ molar mass of hydrated compound
Mass of anhydrous compound = ?
Mass of hydrated compound = 2g
Molar mass of anhydrous compound= 160 g/mol
Molar mass of hydrated compound = 250 g/mol
x/160 = 2/250
250x = 2 ×160
x= 2 × 160/250
x= 1.28 g
PLEASE HELP ME PLEASE PLEASE NOW
Answer:
the amount of trials in an experiment
Vhon Anadome
Atomic nucleus questions
Which of the following decay processes results in the largest change in mass of a nucleus?
Choose 1 answer:
А
Beta decay
Gamma decay
Neutron emission
D
Alpha decay
Answer:
d
Explanation:
Please answer. Brainliest!
The equation is balanced.
Explanation:The number of P atoms in the reactant side is 4 and the number of P atoms in the product side is also 4.
The number of O atoms in the reactant side is 16 and the number of O atoms in the product side is also 16.
The number of H atoms in the reactant side is 12 and the number of H atoms in the product side is also 12.
These results are in accordance with the law of conservation of mass.
#ILoveChemistry
Is soup pure or impure?
Answer:
I think it's impure . Hope this helps you
Answer:
I think is pure but not 100% pure.
Please help! I don't know how to do and want to understand
Explain why rubbing an alkali like bicarbonate of soda onto an acidic bee sting can ease the pain ?
Explain why the buffering action of these chemical reactions is limited by the present day rate of change for atmospheric CO2 concentration
Answer:
Due to increase in carbondioxide gas.
Explanation:
The buffering action of these chemical reactions is limited by the present day rate of change for atmospheric carbondioxide concentration because the the rate of atmospheric carbondioxide rises as compared to ancient atmospheric carbondioxide gas. Due to increase of human activities, the concentration of carbondioxide gas increases in the atmosphere which limits the buffering action of these chemical reactions so we can say that carbondioxide gas is responsible for its limited action.
