2. Below what depth would a submarine have to submerge so that it would not be swayed by surface waves with a wavelength of 24 meters?

Answers

Answer 1

Answer: Below 12m of depth, the submarine has to submerge so that it would not be swayed by surface waves

Explanation:

To avoid the surface waves, a submarine has to submerge below the wave base. It is the position below which the motion of the waves is negligible.

This wave base is equal to half of the wavelength. The equation becomes:

Wave base = [tex]\frac{\text{Wavelength}}{2}[/tex]

We are given:

Wavelength = 24 m

Putting values in above equation, we get:

Wave base = [tex]\frac{24m}{2}=12m[/tex]

Hence, below 12m of depth, the submarine has to submerge so that it would not be swayed by surface waves


Related Questions

Would this pressure difference be greater or smaller if the scuba diver were in seawater (density 1050 kg/m3 ) and went to the same depth you calculated in question D1, took and held his breath, and then returned to the surface

Answers

Answer:

Greater.

Explanation:

This pressure difference will be greater if the scuba diver were in seawater and went to the same depth because the seawater have salts which increases the density of water as compared to freshwater. Salt in water increases the density which automatically increases the pressure on the diver so that's why we can say that the pressure will be increases for the scuba diver in seawater as compared to freshwater.

A proton traveling due west in a region that contains only a magnetic field experiences a vertically upward force (away from the surface of the earth). What is the direction of the magnetic field?

Answers

South

Explanation:

The magnetic force F on a point charge moving with a velocity v in the presence of a magnetic field B is given by

[tex]\vec{\textbf{F}} = q\vec{\textbf{v}}\textbf{×}\vec{\textbf{B}}[/tex]

and according to the right-hand rule, an upward magnetic force on a proton moving westward is only possible if the magnetic field is directed southward.

how many bits are required to sample an incoming signal 4000 times per second using 64 different amplitude level

Answers

Answer:

6 bits

Explanation:

The quality of digitized signal can be improved by reducing quantizing error. This is done by increasing the number of amplitude levels, thereby minimizing the difference between the levels and hence producing a smoother signal.

Also, Sampling frequently (also known as oversampling) can help in improving signal quality.

To get the number of bits, we use:

2ⁿ = amplitude level

where n is the number of bits.

Given an amplitude level of 64, hence:

2ⁿ = 64

2ⁿ = 2⁶

n = 6 bits

Investigators measure the size of fog droplets using the diffraction of light. A camera records the diffraction pattern on a screen as the droplets pass in front of a laser, and a measurement of the size of the central maximum gives the droplet size. In one test, a 690 nm laser creates a pattern on a screen 30 cm from the droplets. If the central maximum of the pattern is 0.24 cm in diameter, how large is the droplet?

Answers

Answer:

the diameter of the droplet is 0.021045 cm or 2.1 × 10⁻² cm

Explanation:

Given the data in the question;

Diameter of bright central maxima;

⇒ 2 × ( 1.22 × (λD/d) ) ⇒ 2.44( λD/d )

where D is the distance from the the droplet to the screen ( 30 cm )

d is the diameter of the droplet

λ is the wavelength of light ( 690 nm  = 690 × 10⁻⁷ cm )

since the central maximum of the pattern is 0.24 cm in diameter,

we substitute

0.24 cm = 2.44( ( 690 × 10⁻⁷ cm × 30 cm ) / d )

solve for d

d = 2.44( ( 690 × 10⁻⁷ cm × 30 cm ) / 0.24 cm

d = 0.0050508 cm² / 0.24 cm

d = 0.021045 cm or 2.1 × 10⁻² cm

Therefore, the diameter of the droplet is 0.021045 cm or 2.1 × 10⁻² cm

If the resistance in a circuit remains constant, what happens to the electric power when the current increases?
The power will increase.
B.
The power will decrease.
Ο Ο Ο Ο
There will be no power.
D
The current does not affect the power.

Answers

Answer:

Resistance is inversly proportional to the current.

V=I.R.

P=V.I

The free-fall acceleration at the surface of planet 1 is 22 m/s^2. The radius and the mass of planet 2 are twice those of planet 1. What is the free-fall acceleration on planet 2?

Answers

Answer:

g₂ = 11 m/s²

Explanation:

The value of free-fall acceleration on the surface of a planet is given by the following formula:

[tex]g = \frac{Gm}{r^2}[/tex]

where,

g = free-fall acceleration

G = Universal Gravitational Constant

m = mass of the planet

r = radius of planet

FOR PLANET 1:

[tex]g_1 = \frac{Gm_1}{r_1^2}\\\\\frac{Gm_1}{r_1^2} = 22 m/s^2[/tex] --------------------- equation (1)

FOR PLANET 2:

[tex]g_2 = \frac{Gm_2}{r_2^2}\\\\g_2 = \frac{G(2m_1)}{(2r_1)^2}\\\\g_2 = \frac{1}{2}\frac{Gm_1}{r_1^2}\\\\[/tex]

using equation (1):

[tex]g_2 = \frac{g_1}{2}\\\\g_2 = \frac{22\ m/s^2}{2}[/tex]

g₂ = 11 m/s²

NASA is giving serious consideration to the concept of solar sailing. A solar sailcraft uses a large, low mass sail and the energy and momentum of sunlight for propulsion. (a) Should the sail be absorbing or reflective

Answers

Answer:

Reflective

Explanation:

The radiation pressure of the wave that totally absorbed is given by;

[tex]P_{abs}= \frac{I}{C}[/tex]

and While the radiation pressure of the wave totally reflected is given by;

[tex]P_{ref}= \frac{2I}{C}[/tex]

Now compare the two-equation you can clearly see that the pressure due to reflection is larger than absorption therefore the sail should be reflective.

A rescue plane spots a survivor 132 m directly below and releases an emergency kit with a parachute. If the package descends at a constant vertical acceleration of 6.89 m/s2 the initial plane horizontal speed was 86.9 m/s, how far away from the survivor will it hit the waves

Answers

Answer: 19.15 meters on the waves away from the survivor.

Explanation:

Which is the definition of refraction?

1)the blocking of light waves vibrating in a particular plane

2) the bending of a light wave as it passes at an angle from one medium to another

3) a false or distorted image causing the gradual distortion of light through hot air

the redirection of light by tiny particles as it passes through a medium

Answers

Answer:

2) The bending of a light wave as it passes at an angle from one medium to another .

Hope it is helpful to you ☺️

Two pendulums have the same dimensions (length {L}) and total mass (m). Pendulum A is a very small ball swinging at the end of a uniform massless bar. In pendulum B, half the mass is in the ball and half is in the uniform bar.
1. Find the period of pendulum A for small oscillations.
2. Find the period of pendulum B for small oscillations.

Answers

Answer:

1) [tex]T_{A} = 2\pi\cdot \sqrt{\frac{l}{g} }[/tex], 2) [tex]T_{B} \approx 1.137\cdot T_{A}[/tex], where [tex]T_{A} = 2\pi\cdot \sqrt{\frac{l}{g} }[/tex].

Explanation:

1) Pendulum A is a simple pendulum, whose period ([tex]T_{A}[/tex]) is determined by the following formula:

[tex]T_{A} = 2\pi\cdot \sqrt{\frac{l}{g} }[/tex] (1)

Where:

[tex]l[/tex] - Length of the massless bar.

[tex]g[/tex] - Gravitational acceleration.

2) Pendulum B is a physical pendulum, whose period ([tex]T_{B}[/tex]) is determined by the following formula:

[tex]T_{B} = 2\pi \cdot \sqrt{\frac{I_{O}}{m\cdot g\cdot l} }[/tex] (2)

Where:

[tex]m[/tex] - Total mass of the pendulum.

[tex]g[/tex] - Gravitational acceleration.

[tex]l[/tex] - Length of the uniform bar.

[tex]I_{O}[/tex] - Moment of inertia of the pendulum with respect to its suspension axis.

The moment of inertia can be found by applying the formulae of the moment of inertia for a particle and the uniform bar and Steiner's Theorem:

[tex]I_{O} = \frac{1}{2} \cdot m\cdot l^{2}+\frac{1}{24}\cdot m\cdot l^{2} + \frac{3}{4}\cdot m\cdot l^{2}[/tex]

[tex]I_{O} = \frac{31}{24}\cdot m\cdot l^{2}[/tex] (3)

By applying (3) in (2) we get the following expression:

[tex]T_{B} = 2\pi \cdot \sqrt{\frac{\frac{31}{24}\cdot m \cdot l^{2} }{m\cdot g \cdot l} }[/tex]

[tex]T_{B} = 2\pi \cdot \sqrt{\frac{31\cdot l}{24\cdot g} }[/tex]

[tex]T_{B} = \sqrt{\frac{31}{24} } \cdot \left(2\pi \cdot \sqrt{\frac{l}{g} }\right)[/tex]

[tex]T_{B} \approx 1.137\cdot T_{A}[/tex]

1. The period of pendulum A for small oscillations is  

[tex]T_A=2\pi\sqrt{\dfrac{L}{g}}[/tex]

2. The period of pendulum B for small oscillations.

[tex]T_B=1.137.T_A[/tex]

What is simple harmonic motion?

Simple harmonic motion is the periodic motion or back and forth motion of any object with respect to its equilibrium or mean position. The restoring force is always acting on the object which try to bring it to the equilibrium.

1) Pendulum A is a simple pendulum, whose period () is determined by the following formula:

[tex]T_A=2\pi\sqrt{\dfrac{L}{g}}[/tex]

Where:

l - Length of the massless bar.

g - Gravitational acceleration.

2) Pendulum B is a physical pendulum, whose period () is determined by the following formula:

[tex]T_A=2\pi\sqrt{\dfrac{I_o}{mgl}}[/tex] .............................2

Where:

m - Total mass of the pendulum.

g - Gravitational acceleration.

l - Length of the uniform bar.

Io- Moment of inertia of the pendulum with respect to its suspension axis.

The moment of inertia can be found by applying the formulae of the moment of inertia for a particle and the uniform bar and Steiner's Theorem:

[tex]I_o=\dfrac{1}{2}ml^2+\dfrac{1}{24}ml^2+\dfrac{3}{4}ml^2[/tex]

[tex]I_o=\dfrac{31}{24}ml^2[/tex]..................................3

By applying (3) in (2) we get the following expression:

[tex]T_B=2\pi\sqrt{\dfrac{\frac{31}{24}ml^2}{mgl}[/tex]

[tex]T_B=2\pi\sqrt{\dfrac{31l}{24g}}[/tex]

[tex]T_B=\sqrt{\dfrac{31}{24}}. (2\pi\sqrt{\dfrac{l}{g}})[/tex]

[tex]TB=1.137.T_A[/tex]

Thus to know more about Simple harmomnic motion follow

https://brainly.com/question/17315536

A random sample of 22 lunch orders at Noodles & Company showed a mean bill of $10.26
with a standard deviation of $5.21. Find the 99 percent confidence interval for the mean bill of
all lunch orders.

Answers

Answer:

(7.115 ; 13.405)

Explanation:

Given :

Sample size, n = 22

Mean bill, μ = 10.26

Standard deviation, s = 5.21

To obtain the 99% confidence interval for the mean bill of all orders ;

Mean ± margin of error

Margin of Error = Tcritical * s/√n

Tcritical at 99%, df = n-1, 22 - 1 = 21

Tcritical = 2.831

Margin of Error = 2.831 * (5.21/√22) = 3.145

Confidence interval = 10.26 ± 3.145

Lower boundary = 10.26 - 3.145 = 7.115

Upper boundary = 10.26 + 3.145 = 13.405

Confidence interval :

(7.115 ; 13.405)

Three spheres (water, iron and ice) of the exact same volume are submerged in a tub of water. After the spheres are lined up, they are released. The spheres are made of plastic with the same density as water, ice, and iron.

Required:
a. Compare the weights of the three spheres.
b. Compare the buoyant forces on the three spheres.
c. What direction does the net force push on each of the spheres?
d. What happens to each sphere after it is released?

Answers

Answer:

(a) Iron > plastic > ice

(b) Same on all

(c) Iron downwards, plastic net force zero, ice upwards.

(d) Iron sphere sinks, plastic sphere is in equilibrium and ice sphere will floats.

Explanation:

Three spheres have same volume , plastic, ice and iron.

(a) The weight is given by

Weight = mass x gravity = volume x density x gravity

As the density of iron is maximum and the density of ice is least so the order of the weight is

Weight of iron > weight of plastic > weight of ice

(b) Buoyant force is given by

Buoyant force = Volume immersed x density of fluid x g

As they have same volume, density of fluid is same so the buoyant force is same on all the spheres.

(c) Net force is

F = weight - buoyant force  

So, the net force on the iron sphere is downwards

On plastic sphere is zero as the density of plastic sphere is same as water. On ice sphere it is upwards.

(d) Iron sphere sinks, plastic sphere is in equilibrium and ice sphere will floats.  

During the same Olympics, Bolt also set the world record in the 200-m dash with a time of 19.30 s. Using the same assumptions as for the 100-m dash, what was his maximum speed for this race

Answers

Answer:

The maximum speed of Bolt for the 100 m race is 14.66 m/s

Explanation:

Given;

initial distance covered by Bolt, d = 200 m

time of this motion, t = 19.3 s

The second distance covered by Bolt, = 100 m

Assuming Bolt maintained the same acceleration for both races.

His acceleration can be determined from the 200 m race.

d = ut + ¹/₂at²

where;

u is his initial velocity = 0

d =  ¹/₂at²

[tex]at^2 = 2d\\\\a = \frac{2d}{t^2} \\\\a = \frac{2\times 200}{19.3^2} \\\\a = 1.074 \ m/s^2[/tex]

Let the final or maximum velocity for the 100 m race = v

v² = u² + 2ad₂

v² =  2 x 1.074 x 100

v² = 214.8

v = √214.8

v = 14.66 m/s

The maximum speed of Bolt for the 100 m race is 14.66 m/s

A car is moving with a velocity of45m/s. Is brought to rest in 5s.the distance travelled by car before it comes to rest is

Answers

Answer:

The car travels the distance of 225m before coming to rest.

Explanation:

Here,

v = 45m/s

t = 5s

d = v × t

Therefore,

d = 45 × 5

= 225m

Which parts of The Action Potential Are Represented On The ECG?

Answers

Which parts of The Action Potential Are Represented On The ECG?The QRS complex of the electrocardiogram corresponds to the action potential depolarization, while the T wave is associated with ventricular repolarization. Torsades de pointes is associated with the twisting of the QRS complex around the isoelectric line on the electrocardiogram.

Answer:

The phases of the cardiac action potential correspond to the surface ECG (ECG) (Figure). The P wave reflects atrial depolarization (phase 0), the PR interval reflects the conduction velocity through the AV node, the QRS complex the ventricular depolarization and QT interval the duration potential ventricular action.

1.Lõi thép máy biến áp được ghép từcác lá thép là để:

(a) Giảm tổn hao công suất do dòng điện xoáy

(b) Giảm tổn hao công suất do từ trễ

(c) Giảm tổn hao công suất do dòng điện chạy qua dây quấn

(d) Giảm tất cảcác loại tổn hao công suất.

Answers

Answer:

Option (c)

Explanation:

1.The transformer core is assembled from steel sheets to:

(a) Reduced power loss due to eddy current

(b) Reduced power loss due to hysteresis

(c) Reduced power loss due to current flowing through the winding

(d) Reduce all types of power loss.

A transformer is a device which converts the low voltage into high and vice  versa.

There are two types of a transformer.

Step up: It is used to convert low voltage into high.

Step down It is used to convert high voltage into high.

It depends on the number of turns in primary and the secondary coil.

The core of the transformer is laminated and it is in the form of sheets.

By using such type of core, the power loss due to the windings is reduced.

option (c) .

The atoms in your body are mostly empty space . And so are the atoms in any wall. Why then is your body unable to pass through walls ?

Answers

First of all, both are not a single sheet of atom. There are many layers of atoms, so the empty part gets beside each other, so there are less empty part. Secondly, there are so many atoms that the probability that they will have empty space at the same place necessary, is negligible.

This was something from logic.

The reason I was taught in my class was that only a limited number of electrons can be in a given orbit, so atoms cannot overlap each other.

Which of the following is a noncontact force?
O A. Friction between your hands
O B. A man pushing on a wall
O C. Air resistance on a car
D. Gravity between you and the Sun

Answers

Answer:

Gravity between you and the sun

A hot air balloon is a sphere of volume 2210 m3. The density of the hot air inside is 1.13 kg/m3, while the air outside has a density of 1.29 kg/m3. The balloon itself has a mass of 240 kg. What is the TOTAL NET force acting on the balloon?
[?]N

Answers

The total net force acting on the balloon will be 24498 Newtons

Given that

Volume of the balloon = 2210 cubic meter

Density of the air inside the balloon = 1.13  kg/m3

What will be the net force exerted on the balloon ?

Here force on the balloon will be equal to the weight of the air displaced by balloon

[tex]F= mass of air displaced\times gravity[/tex]

[tex]F= Density \times volume \times gravity[/tex]

[tex]F=1.13 \times 2210 \times 9.81[/tex]

[tex]F=24498 N[/tex]

The total net force acting on the balloon will be 24498 Newtons

To know more about buoyancy force follow

https://brainly.com/question/117714

Find the current in the thin straight wire if the magnetic field strength is equal to 0.00005 T at distance 5 cm. ​

Answers

Answer:

Answer

Correct option is

A

5×10

−6

tesla

I=5A

x=0.2m

Magnetic field at a distance 0.2 m away from the wire.

B=

2πx

μ

0

I

=

2π×0.2

4π×10

−7

×5

=10×5×10

−7

=5×10

−6

tesla




A student claimed that thermometers are useless because a
thermometer always registers its own temperature. How would you
respond?
[

Answers

the thermometer is the temperature that is around it so its registering the temperature its supposed to

What is the temperature of a system in thermal equilibrium with another system made up of water and steam at one atmosphere of pressure

Answers

Full Question:

What is the temperature of a system in thermal equilibrium with another system made up of water and steam at one atmosphere of pressure?

A) 0°F

B) 273 K

C) 0 K

D) 100°C

E) 273°C

Answer:

The correction Option is D) 100°C

Explanation:

The temperature above is referred to as the critical point.

it is the highest temperature and pressure at which water (which has three phases - liquid, solid, and gas) can exist in vapor/liquid equilibrium. If the temperature goes higher than 100 degrees celsius, it cannot remain is liquid form regardless of what the pressure is at that point.

There is also a condition under which water can exist in its three forms: that is  

- Ice (solid)

- Liquid (fluid)

- Gas (vapor)

That state is called triple point. The conditions necessary for that to occur are:

273.1600 K (0.0100 °C; 32.0180 °F)  as temperature and611.657 pascals (6.11657 mbar; 0.00603659 atm) as pressure

Cheers

Cheers

What's the speed of a sound wave through water at 25 Celsius?
A. 1,000 m/s
B. 1,500 m/s
C. 1,250 m/s
D. 750 m/s

Answers

Answer:

B) 1500m/s

Explanation:

Ans is 1500m/s

Two objects attract each other with a gravitational force of magnitude 1.00 3 1028 N when separated by 20.0 cm. If the total mass of the two objects is 5.00 kg, what is the mass of each

Answers

Answer:

The mass of each object is 2kg and 3 kg.

Explanation:

Given that,

Gravitational force,[tex]F=1\times 10^{-8}\ N[/tex]

The distance between masses, d = 20 cm = 0.2 m

The total mass of the two objects, M + m = 5 kg

M = 5-m

The formula for the gravitational force is :

[tex]F=G\dfrac{Mm}{d^2}\\\\1\times 10^{-8}=6.67\times 10^{-11}\times \dfrac{(5-m)m}{(0.2)^2}\\\\\frac{1\times10^{-8}}{6.67\times10^{-11}}=\frac{(5-x)x}{(0.2)^{2}}\\\\\frac{1\times10^{-8}}{6.67\times10^{-11}}\cdot(0.2)^{2}\\\\5.99=(5-x)x\\\\x=2\ kg\ and\ 3 \ kg[/tex]

So, the mass of each object is 2kg and 3 kg.

Helium gas at 20 °C is confined within a rigid vessel. The gas is then heated until its pressure is doubled. What is the final temperature of the gas?

Answers

Answer:

586 K

Explanation:

Let P is the initial pressure.

Initial temperature, T₁ = 20°C = 293 K

Final pressure, P₂ = 2P

We need to find the final temperature of the gas.

The relation between the pressure and the temperature is as follows

[tex]P\propto T\\\\or\\\\\dfrac{P_1}{P_2}=\dfrac{T_1}{T_2}[/tex]

Put all the values,

[tex]\dfrac{P}{2P}=\dfrac{293}{T_2}\\\\\dfrac{1}{2}=\dfrac{293}{T_2}\\\\T_2=2\times 293\\\\T_2=586\ K[/tex]

So, the final temperature of the gas is 586 K.

b) Assume the rod is 0.60 m long and has a mass of 0.50 kg, and the clay blob has a mass of 0.20 kg and moves at an initial velocity of 8.0 m/s. Calculate the final angular velocity of the rod. Be sure to put units in your calculation and show the resulting units in your answer.

Answers

Answer:

The correct answer is "6.96 rad/s".

Explanation:

The given values are:

Length,

L = 0.6 m

Mass,

m₁ = 0.5 kg

m₂ = 0.2 kg

Initial velocity,

V = 8 m/s

Now,

The final angular velocity will be:

⇒ [tex]\omega =\frac{6m_1V}{(4m_1+3m_2)L}[/tex]

By substituting the values, we get

⇒     [tex]=\frac{6\times 0.2\times 8}{(4\times 0.2+3\times 0.5)0.6}[/tex]

⇒     [tex]=\frac{9.6}{1.38}[/tex]

⇒     [tex]=6.96 \ rad/s[/tex]

At what distance x from the center of the coil, on the axis of the coil, is the magnetic field half its value at the center?

Answers

Answer:

The value of x is 2.1 cm from the center of the coil.

Explanation:

Radius, R = 2.7 cm

Number of turns, N = 800

The magnetic field at the axis is half of the magnetic field at the center.

[tex]B_{axis}=\frac{B_{center}}{2}\\\\\frac{\mu o}{4\pi}\times \frac{2 \pi I N R^2}{\left (R^2 + x^2 \right )^{\frac{3}{2}}} = 0.5\frac{\mu o}{4\pi}\times\frac{2\pi N I}{R}\\\\\frac{R^2}{(R^2 + x^2)^\frac{3}{2}} = \frac{1}{2R}\\\\4R^6 = (R^2+x^2)^3\\\\1.6 R^2 = R^2 + x^2\\\\x^2 = 0.6 \times 2.7\times 2.7 \\\\x = 2.1 cm[/tex]

A block of mass M is connected by a string and pulley to a hanging mass m. The coefficient of kinetic friction between block M and the table is 0.2, and also, M = 20 kg, m = 10 kg. How far will block m drop in the first seconds after the system is released?
How long will block M move during above time?
At the time, calculate the velocity of block M
Find out the deceleration of the block M, if the connected string is
removal by cutting after the first second. Then, calculate the time
taken to contact block M and pulley.

Answers

Answer:

a)  y = 0.98 t², t=1s y= 0.98 m,  

b) he two blocks must move the same distance

c) v = 1.96 m / s,  d)  a = -1.96 m / s², e)  x = 0.98 m

Explanation:

For this exercise we can use Newton's second law

Big Block

Y axis

             N-W = 0

             N = M g

X axis

             T- fr = Ma

the friction force has the expression

             fr = μ N

             fr = μ Mg

small block

             w- T = m a

             

we write the system of equations

             T - fr = M a

             mg - T = m a

we add and resolved

             mg-  μ Mg = (M + m) a

             a = [tex]g \ \frac{m - \mu M}{m+M}[/tex]

             a = [tex]9.8 \ \frac{10- 0.2 \ 20}{ 10 \ +\ 20}[/tex]

             a = 9.8 (6/30)

             a = 1.96 m / s²

a) now we can use the kinematic relations

             y = v₀ t + ½ a t²

the blocks come out of rest so their initial velocity is zero

             y = ½ a t²

             y = ½ 1.96 t²

             y = 0.98 t²

for t = 1s y = 0.98 m

       t = 2s y = 1.96 m

b) Time is a scale that is the same for the entire system, the question should be oriented to how far the big block will move.

As the curda is in tension the two blocks must move the same distance

c) the velocity of the block M

           v = vo + a t

           v = 0 + 1.96 t

for t = 1 s v = 1.96 m / s

       t = 2 s v = 3.92 m / s

d) the deceleration if the chain is cut

when removing the chain the tension becomes zero

           -fr = M a

          - μ M g = M a

          a = - μ g

          a = - 0.2 9.8

          a = -1.96 m / s²

e) the distance to stop the block is

         v² = vo² - 2 a x

        0 = vo² - 2a x

        x = vo² / 2a

        x = 1.96² / 2 1.96

        x = 0.98 m

the time to travel this distance is

        v = vo - a t

        t = vo / a

        t = 1.96 /1.96

        t = 1 s

Electrical resistance is a measure of resistance to the flow of _?____

Answers

Resistance is a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms, symbolized by the Greek letter omega (Ω). Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who studied the relationship between voltage, current and resistance.

Hope this helps!!!!

Answer:

electric current

Explanation:

The answer is electric current

TIME REMAINING
45:43
What are possible units for impulse? Check all that apply.

kg • m
kg • meters per second
N • s
N • m
StartFraction Newtons times meters per second EndFraction

Answers

Answer:

n.m maby

Explanation:

i think or its kg m/s

Answer:

answer (B) & (C)

Explanation:

kg • /N • s

Other Questions
expalin gender inequality in nepal Can someone explain this Help me please.. The meaning of analysis isA. absence of a wholeB. to dissect.C. a cutting apart.D. a separating into parts. Select any decade from the nineteenth or the twentieth century and create a timeline that traces the significant developments in the field ofpsychology across that decade. Your timeline should include at least 10 significant psychological developments that span the decade that youselect. If a runner jogs 3 miles west and then jogs 8 milesnorth, how far is the runner from her starting pointif she plans to run straight back? Remember tosimplify your answer. Cell phones are an integrated part of our society at this point, and their main use is communication. They keep students in touch with the rest of the world by giving them the power to interact with it. In my day, if you forgot your lunch you were at the mercy of the office calling home for you. Now, students have the ability to solve their own problems and handle certain "emergencies" on their own.Cell phones also allow students the ability when the time is right, to keep in touch with students at other schools or friends that don"t go to school. While not an educational benefit directly, better relationships can lead to higher self-esteem and reduce isolation, which is good for everybody. In the same way, camera phones allow students to capture the kinds of memories that help build a solid school culture, and, in some cases, can act as documentation of misbehavior in the same way that store cameras provide evidence and deter bad behavior.Academically, the cell phone can act as to record video of a procedure of explanation that may need to be reviewed later. It could be used to record audio of a lecture, as well, for later review. And just imagine if class could be easily taped for students who are absent? What if they could even be streamed and seen from home instantly?The iPod is a little trickier, because its function varies greatly by model. At its heart, it is a media player, and I know for a fact that many students work better while listening to music. For this reason, they can have a good effect by keeping students from getting too distracted while working (ironic, because we mostly think of them AS distractions!). If it is a WIFI compatible model, and wireless internet is available, the iPod can be a great tool for looking up information or digging into things more deeply. Depending on the model, it may be able to act as a camera and video recorder as well (with the same benefits as the cell phone).Devices like the Kindle could, conceivably, make learning a lot easier. Imagine carrying all your textbooks in the palm of your hand, rather than strapped to your back! Though expensive, compared to buying new textbooks, the Kindle is a bargain. Many of the books used in high school English classes are actually FREE on the Kindle.Which of the following is NOT true about the iPod according to the passage?. A.The iPod can be used to record videos B.The iPod can be used to make phone calls C.The iPod can be connected to the Internet. D.The iPod comes in different models. On January 2, 2021, L Co. issued at face value $22,000 of 3% bonds convertible in total into 1,400 shares of L's common stock. No bonds were converted during 2021. Throughout 2021, L had 1,400 shares of common stock outstanding. L's 2021 net income was $4,000. L's income tax rate is 30%. No potential common shares other than the convertible bonds were outstanding during 2021. L's diluted earnings per share for 2021 would be: what is the sign of x/y times 7y^3 when x0? A. Positive B. Negative C. Zero Choose the word that has the underlined part pronounced different from the others: A. Know B. Close C. Town D. Sofa Whats this topic called 1. Este tipo de organizacin social se desarroll en el periodo Paleoltico; es el trmino con el que se denomina a los primeros modelos de sociedad que se dieron en la prehistoria, su final se produjo con la Revolucin neoltica, cuando el ser humano dej de ser nmada, comenz a usar la agricultura y los trabajos se especializaron. 1Comunidad primitiva2Civilizacin primitiva3Organizacin primitiva4Grupos primitivos PLEASE HELP!Determine which of the following points lies on the graph of y=[tex]\sqrt{x} x+4[/tex]I have been working on this all morning. I have used different calculators and the answers that I am getting do not match any of the choices I am given on my homework. I can choose from (0,4), (5,3), (-3,0), and (12,5). Reduce 20/60 to its lowest common denominator 1.Graph the data in the table. Which kind of function best models the data? Write an equation to model the data.A. exponential; y = 6 1.5xB. quadratic; y = x2C. exponential; y = 6 2.5xD. linear; y = 3x 6 I cant solve plz help me ... 35. When did you start loving him?A. How long has you loved him?B. How long hasnt you loved him?C. How long havent you loved him?D. How long have you loved him? In a food preference experiment, 80 lizards were given the opportunity to choose to eat one of three different species of insects. The results showed that 33 of the lizards chose species A, 12 chose species B, and 35 chose species C. They conducted a Chi-squared analysis to test for equal preference. What are the Null and Alternate hypothesis for this test The number of solutions of |x - 1| + |x - 3| = 2 is The slope of a line is -4 and Y negative intercept is -3 what is the equation of the line written in slope intercept form