19 point please please answer right need help

Block on an incline
A block of mass m1 = 3.9 kg on a smooth inclined plane of angle 38is connected by a cord over a small frictionless
pulley to a second block of mass m2 = 2.6 kg hanging vertically. Take the positive direction up the incline and use 9.81
m/s2 for g.
What is the tension in the cord to the nearest whole number?

Answer:

Abby is standing (4.5^2 + 2.3^2)^1/2   from the far speaker

D2 = 5.05 m from the far speaker

The difference in distances from the speakers is

5.05 - 4.5 = .55 m     (Let y be wavelength, lambda)

n y = 4.5

(n + 1) y = 5.05 for the speakers to be in phase at smallest wavelength

y = .55 m          subtracting equations

f = v / y = 340 / .55 = 618 / sec     should be the smallest frequency

Answer:

[tex]h=10m[/tex]

Explanation:

From the question we are told that:

Area [tex]a=70 x 10^{-6}[/tex]

Force [tex]F=7N[/tex]

Generally the equation for Pressure is mathematically given by

Pressure = Force/Area

[tex]P=\frac{F}{A}[/tex]

[tex]P=\frac{ 7}{(70 * 10^{-6})}[/tex]

[tex]P= 1*10^{5} Pa[/tex]

Generally the equation for Pressure is also mathematically given by

[tex]P=hpg[/tex]

Therefore

[tex]h=\frac{P}{hg}[/tex]

[tex]h=\frac{10000}{1000*9.8}[/tex]

[tex]h=10m[/tex]

Answer:

[tex]P_b = \frac{\rho_b}{\rho_a} \ P_a[/tex]

Explanation:

The pressure at a depth of a fluid is

       P = ρ g y

where ρ is the density of the fluid, y the depth of the gauge measured from the surface of the fluid.

In this case the pressure for fluid A is

      Pa = ρₐ g y

the pressure for fluid B is

      P_b = ρ_b g y

depth y not changes as the gauge is stationary

if we look for the relationship between these pressures

       [tex]\frac{P_a}{P_b} = \frac{ \rho_a}{\rho_b}[/tex]

        [tex]P_b = \frac{\rho_b}{\rho_a} \ P_a[/tex]

therefore we see that the pressure measured for fluid B is different from the pressure of fluid A

if  ρₐ < ρ_b B the pressure P_b is greater than the initial reading

   ρₐ>  ρ_b the pressure in B decreases with respect to the reading in liquid A

Solution :

Whenever the lightbulbs are used as resistors, we throw the switch to the left. This allows the current to flow through the circuit which causes the bulb to glow and also the capacitor gets charged. When the capacitor gets fully charged, the electric field becomes constant between its two plates. Now there is no displacement current induced in the plates of the capacitor. The capacitor works as an open switch and the bulb gets switched off.

And thus the bulb flashes for the moment as opposed to continuous glow.

Answer:

Explanation:

The law of reflection says that the reflected angle (measured from a vertical line to the surface  called the normal) is equal to the reflected angle measured from the same normal line.

All other properties of reflection flow from this one statement.

Answer:

Explanation:

Given force between 2 currents carrying

wires = F₀

Magnetic force between the2 wires =F₀= (μ₀/4π) x ( 2 (μ₀/4π) x ( 2I₁I₂ / μ) x L

where I₁=Current in wire 1

           I₂= Current in wire 2

           L= Length of the wire

when one current is doubled and the other is halved

I₁= 2 I₁

I₂=    I₂/2

F₀ = (μ₀/4π) x ( 2× (2I₁) (I₂/2) / μ) x L

Answer:

Types of tidal turbines

Axial turbines.

Crossflow turbines.

Flow augmented turbines.

Oscillating devices.

Venturi effect.

Tidal kite turbines.

Turbine power.

Resource assessment.

Answer:

Axial turbines

Crossflow turbines

flow augmented turbines

Answer:

heyaa thereeee

see temperature is rising in interval of

0 to 4 minutes

8 to 10 minutes

but 8 to 10 is NOT in options

so answer is option a) 0 to 4 minutes

:))))

Answer:

So, with 2 Faraday of electricity, we can decompose (2/4 × 2) = 1 mole of water. So 18 grams of water is decomposed.

Answer:

Electric generator is the device that converts mechanical energy into electrical energy

Element is

[tex]\boxed{\sf {}^{27}Al_{13}}[/tex]

[tex]\\ \sf\longmapsto No\:of\:Protons=Atomic \:Number=13[/tex]

[tex]\\ \sf\longmapsto No\:of\:Neutrons=Mass\:number-Atomic\:Number[/tex]

[tex]\\ \sf\longmapsto No\:of\:Neutrons=27-13[/tex]

[tex]\\ \sf\longmapsto No\:of\:Neutrons=14[/tex]

And

[tex]\\ \sf\longmapsto No\:of\:electrons=No\:of\:Protons=13[/tex]

Answer:

the initial velocity of the car is 12.04 m/s

Explanation:

Given;

force applied by the break, f = 1,398 N

distance moved by the car before stopping, d = 25 m

weight of the car, W = 4,729 N

The mass of the car is calculated as;

W = mg

m = W/g

m = (4,729) / (9.81)

m = 482.06 kg

The deceleration of the car when the force was applied;

-F = ma

a = -F/m

a = -1,398 / 482.06

a = -2.9 m/s²

The initial velocity of the car is calculated as;

v² = u² + 2ad

where;

v is the final velocity of the car at the point it stops = 0

u is the initial velocity of the car before the break was applied

0 = u² + 2(-a)d

0 = u² - 2ad

u² = 2ad

u = √2ad

u = √(2 x 2.9 x 25)

u =√(145)

u = 12.04 m/s

Therefore, the initial velocity of the car is 12.04 m/s

We are being given that:

A pictorial view showing the diagrammatic representation of the information given in the question is being attached in the image below.

From the attached image below, the potential difference across the conducting element of the length (dx) moving with the velocity (v) appears to be perpendicular to the magnetic field (B).

The magnitude of the potential difference induced between the center of the blade in relation to either of its ends can be determined by using the derived formula from Faraday's law of induction which can be expressed as:

[tex]\mathsf{E = B\times l\times v}[/tex]

where;

From the diagram, Let consider the length of the conducting element (dx) at a distance of length (x) from the center O.

Then, the velocity (v) = ωx

The potential difference across it can now be expressed as:

[tex]\mathsf{dE = B*(dx)*(\omega x)}[/tex]

For us to determine the potential difference, we need to carry out the integral form from center point O to L/2.

∴

[tex]\mathsf{E = \int ^{L/2}_{0}* B (\omega x ) *(dx)}[/tex]

[tex]\mathsf{E = B (\omega ) \times \Big[ \dfrac{x^2}{2}\Big]^{L/2}_{0}}[/tex]

[tex]\mathsf{E = B (\omega ) * \Big[ \dfrac{L^2}{8}\Big]}[/tex]

Recall that,

[tex]\mathsf{E = (4\times 10^{-3}) * (17) \Big[ \dfrac{(1.5)^2}{8}\Big]}[/tex]

[tex]\mathsf{E = 19.13 mV}[/tex]

Thus, we can now conclude that the magnitude of the potential difference as a result of the rotation caused by the metal blade from the center to either of its ends is 19.13 mV.

Learn more about Faraday's law of induction here:

https://brainly.com/question/13369951?referrer=searchResults

Answer:

c) kinetic energy

Explanation:

Answer: C)  kinetic energy

Explanation:

Answer:

Liquids evaporate faster as they heat up and more particles have enough energy to break away. The particles need energy to overcome the attractions between them. ... At this point the liquid is boiling and turning to gas. The particles in the gas are the same as they were in the liquid they just have more energy.

Answer:

W = 641.52 J

Explanation:

The work done here will be the sum of potential energy and the kinetic energy of the boy. Here potential energy accounts for vertical motion part while the kinetic energy accounts for the horizontal motion part:

[tex]Work\ Done = Kinetic\ Energy + Potential\ Energy\\\\W = K.E +P.E\\\\W = \frac{1}{2}mv^2+mgh\\\\[/tex]

where,

W = Work Done = ?

m = mass = 6 kg

v = speed = 4.2 m/s

g = acceleration dueto gravity = 9.81 m/s²

h = height = 10 m

Therefore,

[tex]W = \frac{1}{2}(6\ kg)(4.2\ m/s)^2+(6\ kg)(9.81\ m/s^2)(10\ m)[/tex]

W = 52.92 J + 588.6 J

W = 641.52 J

Answer:

960 nm

Explanation:

Given that:

wavelength = 640 nm

For the second (2nd) dark spot;  the order of interference m = 1

Thus, the path length difference is expressed by the formula:

[tex]d sin \theta = (m + \dfrac{1}{2}) \lambda[/tex]

[tex]d sin \theta = (1 + \dfrac{1}{2}) 640[/tex]

[tex]d sin \theta = ( \dfrac{3}{2}) 640[/tex]

dsinθ = 960 nm

Answer:

D) 1003 N​

Explanation:

Given the following data;

Mass of man = 85 kg

Acceleration of elevator = 2 m/s²

Acceleration due to gravity, g = 9.8 m/s²

To find the force exerted by the man on the floor;

Force = mg + ma

This question is incomplete, the complete question is;

A solenoid has a length 11.34 cm , a radius 1.85 cm , and 1627 turns. The solenoid has a net resistance of 144.9 Ω . A circular loop with radius of 3.77 cm is placed around the solenoid, such that it lies in a plane whose normal is aligned with the solenoid axis, and the center of the outer loop lies on the solenoid axis. The outer loop has a resistance of 1651.6 Ω. At a time of 0 s , the solenoid is connected to a battery that supplies a potential 34.95 V. At a time 2.58 μs , what current flows through the outer loop?

Answer:

the current flows through the outer loop is 1.3 × 10⁻⁵ A

Explanation:

Given the data in the question;

Length [tex]l[/tex] = 11.34 cm = 0.1134 m

radius a = 1.85 cm = 0.0185 m

turns N = 1627

Net resistance [tex]R_{sol[/tex] = 144.9 Ω

radius b = 3.77 cm = 0.0377 m

[tex]R_o[/tex] = 1651.6 Ω

ε = 34.95 V

t = 2.58 μs = 2.58 × 10⁻⁶ s

Now, Inductance; L = μ₀N²πa² / [tex]l[/tex]

so

L = [ ( 4π × 10⁻⁷ ) × ( 1627 )² × π( 0.0185 )² ] / 0.1134

L = 0.003576665 / 0.1134

L = 0.03154

Now,

ε = d∅/dt = [tex]\frac{d}{dt}[/tex]( BA ) =  [tex]\frac{d}{dt}[/tex][ (μ₀In)πa² ]

so

ε = μ₀n [tex]\frac{dI}{dt}[/tex]( πa² )

ε = [ μ₀Nπa² / [tex]l[/tex] ] [tex]\frac{dI}{dt}[/tex]

ε = [ μ₀Nπa² / [tex]l[/tex] ] [ (ε/L)e^( -t/[tex]R_{sol[/tex]) ]

I = ε/[tex]R_o[/tex] = [ μ₀Nπa² / [tex]R_o[/tex][tex]l[/tex] ] [ (ε/L)e^( -t/[tex]R_{sol[/tex]) ]

so we substitute in our values;

I = [ (( 4π × 10⁻⁷ ) × 1627 × π(0.0185)²) / (1651.6 ×0.1134) ] [ ( 34.95 / 0.03154)e^( -2.58 × 10⁻⁶ / 144.9 ) ]

I = [ 2.198319 × 10⁻⁶ / 187.29144 ] [ 1108.116677 × e^( -1.7805 × 10⁻⁸ )

I = [ 1.17374 × 10⁻⁸ ] × [ 1108.116677 × 0.99999998 ]

I = [ 1.17374 × 10⁻⁸ ] × [ 1108.11665 ]

I = 1.3 × 10⁻⁵ A

Therefore, the current flows through the outer loop is 1.3 × 10⁻⁵ A

Answer:

1.28 *10^-5 A

Explanation:

Same work as above answer. Needs to be more precise

Answer:

About 37.70 radians.

Explanation:

1 revolution = 2[tex]\pi[/tex] radians

∴ 6 revolutions = (6)(2[tex]\pi[/tex] radians)

6 revolutions = 37.6991 or ≈ 37.70 radians

Answer:

The pressure of water progressively increases as the depth of the water increases. The pressure increases as the depth of a point in a liquid increases. The walls of the vessel in which liquids are held are likewise subjected to pressure. The sideways pressure exerted by liquids increases as the liquid depth increases.

Answer:

9 Brainly hahaha ............huh

Answer:

5 kilometers per hour

Explanation:

Speed = distance / time

Distance: 50km

Time: 10 hours

Speed = 50/10 = 5kph

Answer:

5kmph

Explanation:

if the bus traveled 50 km in 10 hours, we have to divide 50 by 10 to see how fast it traveled per hour.

50/10 = 5

therefore, the bus was traveling 5 km per hour

hope this helps :)

Answer:

5 m/s I hope it will help you

Explanation:

mark me as a brainlist answer

Answer:

X = 10.8387 cm²/s

Explanation:

In this exercise, you're required to convert a value from one unit to another.

Converting 42 ft²/hr to cm²/s;

Conversion:

1 ft² = 929.03 cm²

42 ft² = X cm²

Cross-multiplying, we have;

X = 42 * 929.03

X = 39019.26 cm²

Next, we would divide by time in seconds.

1 hour = 3600 seconds

X = 39019.26/3600

X = 10.8387 cm²/s

Answer:

velocity is the answer of this question.

Answer:

Velocity is the right answer ok

Answer:

λ₂ = 357.3 nm

Explanation:

The expression for double-slit interference is

          d sin θ = m λ                 constructive interference

          d sin θ = (m + ½) λ        destructive interference.

The initial data corresponds to a constructive interference, they indicate that we are in the fourth order (m = 4), let's look for the separation of the slits

         d sin θ = m λ₁

now ask for destructive interference for m = 4

        d sin θ = (m + ½) λ₂

we match these two expressions

         m λ₁ = (m + ½) λ₂

         λ₂ = ( m / m + ½) λλ₁  

let's calculate

         λ₂ =[tex]\frac{4}{(4.000 +0.5) \ 401}[/tex]

        λ₂ = 357.3 nm

Check attached photo

Check attached photo

Answer:

1.84 hours

I hope it's helps you

Answer:

Current =,charge / time

Charge = e = 1.6E-19 coulombs

t = T time for 1 revolution  (period)

v = S / T = distance traveled in 1 revolution / time for 1 revolution

T = S / v = 2 pi * 4.76E-10 / 2.43E5 = 1.23E-14

I = Q / T = 1.6E-19 / 1.23E-14 = 1.30E-5