14. Two angles of a triangle measure 57º and 46°. What is the measure of the

largest exterior angle of the triangle?

a. Calculate the expected arrival time:

Given: Time range for arrival of elevator during the next 4.7 minutes is equally likely. The expected value of a discrete random variable is calculated by multiplying each possible value by its probability and adding up the products. So, we can calculate the expected value of the elevator arrival time by integrating the value of the probability density function (which is a straight line in this case) over the given interval. The area under the curve of the probability density function over the entire interval of possible values is 1. The expected arrival time (E) of the elevator is given by: E = (1/4.7) ∫(0 to 4.7) tdt= (1/4.7) [t²/2] [from 0 to 4.7]= 2.3596 minutes or 2.36 minutes (rounded to 2 decimal places)Therefore, the expected arrival time is 2.36 minutes.

b. Probability that an elevator arrives in less than 1.8 minutes:

To calculate the probability of an event happening, we need to find the area under the probability density function (pdf) over the given interval (in this case, less than 1.8 minutes). The pdf is a straight line with a slope of 1/4.7, so the equation of the line is: f(t) = (1/4.7) t. The probability of the elevator arriving in less than 1.8 minutes is: P(T < 1.8) = ∫(0 to 1.8) f(t) dt= ∫(0 to 1.8) (1/4.7) t dt= (1/4.7) [t²/2] [from 0 to 1.8]= 0.56765 (rounded to 4 decimal places)Therefore, the probability that an elevator arrives in less than 1.8 minutes is 0.568 (rounded to 3 decimal places).

c. Probability that the wait for an elevator is more than 1.8 minutes: The probability that the wait for an elevator is more than 1.8 minutes is the complement of the probability that it arrives in less than 1.8 minutes. P(T > 1.8) = 1 - P(T < 1.8) = 1 - 0.56765= 0.43235 (rounded to 3 decimal places)Therefore, the probability that the wait for an elevator is more than 1.8 minutes is 0.432 (rounded to 3 decimal places).

The arrival time of an elevator in a 12 story dormitory : https://brainly.com/question/15036711

#SPJ11

In the following question, among the various parts to solve- a) the probability that the individual waits more than 7 minutes is 0.3. b)the probability that the individual waits between 2 and 7 minutes is 0.5.

a) The probability that an individual will wait more than 7 minutes can be found as follows:

Given that the waiting time of an individual is a continuous uniform distribution and that a bus arrives at the bus stop every 10 minutes.Since the waiting time is a continuous uniform distribution, the probability density function (PDF) can be given as:fX(x) = 1/(b-a)where a = 0 and b = 10.

Hence the PDF of the waiting time can be given as:fX(x) = 1/10The probability that an individual waits more than 7 minutes can be obtained using the complementary probability. This is given by:P(X > 7) = 1 - P(X ≤ 7)The probability that X ≤ 7 can be obtained using the cumulative distribution function (CDF), which is given as:FX(x) = P(X ≤ x) = ∫fX(t) dtwhere x ∈ [a,b].In this case, the CDF of the waiting time is given as:FX(x) = ∫0x fX(t) dt= ∫07 1/10 dt + ∫710 1/10 dt= [t/10]7 + [t/10]10= 7/10Using this, the probability that an individual waits more than 7 minutes is:P(X > 7) = 1 - P(X ≤ 7)= 1 - 7/10= 3/10= 0.3So, the probability that the individual waits more than 7 minutes is 0.3.

b) The probability that the individual waits between 2 and 7 minutes can be calculated as follows:P(2 < X < 7) = P(X < 7) - P(X < 2)Since the waiting time is a continuous uniform distribution, the PDF can be given as:fX(x) = 1/10Using the CDF of X, we can obtain:P(X < 7) = FX(7) = (7 - 0)/10 = 0.7P(X < 2) = FX(2) = (2 - 0)/10 = 0.2Therefore, P(2 < X < 7) = 0.7 - 0.2 = 0.5So, the probability that the individual waits between 2 and 7 minutes is 0.5.

For more such questions on probability

https://brainly.com/question/24756209

#SPJ11


The work done is 3750 Joules on the box.

To quantitatively express this concept, the work W is equal to the force f times the distance d, or W = fd. If the force is applied at an angle to the displacement, the work is W = fd cos.t.

The equation W = F * d * cos(theta), where W is the work done, F is the force applied, d is the displacement of the item, and theta is the angle between the force and displacement vectors, can be used to solve this problem.

The force in this instance is 500 N, and the distance is provided as 15 m, and the 60 degree angle between the vectors of force and displacement.

So, by changing these numbers in the equation, we obtain:

W = 500 N x 15 m x cos (60 degrees)

We can simplify this to: Applying the trigonometric identity cos(60 degrees) = 1/2

W = (500 N) * (15 m) * (1/2)

W = 3750 J.

To know more about work done visit:-

https://brainly.com/question/29050812

#SPJ1

The relation O is not reflexive, symmetric, and not transitive is one of the following statements that is true about the relation O.  which is option (C).


Given, [tex]\forall m, n \in Z, m O n \longleftrightarrow \exists k \in Z \mid(m-n)=2 k+1[/tex]
Let's verify for the following relations :
Reflexive relation:
[tex]\forall a\in Z, a O a \longrightarrow \exists k\in Z \mid (a-a)= 2k+1[/tex]
[tex]0\neq 2k+1[/tex] for all k [tex]\in[/tex] Z
Since 2k+1 can never be zero for any k [tex]\in[/tex] Z, hence we conclude that the relation O is not reflexive.
Symmetric relation:
Suppose a, b [tex]\in[/tex] Zsuch that a O b i.e. (a-b)=2k+1, where k[tex]\in[/tex] Z.
Now, we need to check whether b O a is true or not i.e. (b-a)=2j+1 for some j[tex]\in[/tex] Z
We have,
[tex](a-b) = 2k+1 \longrightarrow (b-a) = -2k-1 = 2(-k) - 1[/tex]
Let j=-k-1, then we have j[tex]\in[/tex] Z and 2j+1 = -2k-1
Hence, (b-a) = 2j+1, and we conclude that the relation O is symmetric.
Transitive relation:
Suppose a, b, c[tex]\in[/tex] Z such that a O b and b O c.
Now, we need to check whether a O c is true or not.
We have,
(a-b)=2k_1+1 and (b-c)=2k_2+1 for some k_1,k_2[tex]\in[/tex] Z
(a-b)+(b-c) = 2k_1+1 + 2k_2+1
a-c = 2k_1+2k_2+2
Let j=k_1+k_2+1, then we have j[tex]\in[/tex] Z and a-c=2j
Hence, (a-c) is even and we conclude that the relation O is not transitive.
Therefore, the relation O is not reflexive, symmetric, and not transitive. Hence, option (C) is the correct answer.

To know more about relation: https://brainly.com/question/28827119

#SPJ11

The distance between car A and the airplane is changing at a rate of 148.38 km/hr.

To better understand this answer, we can draw a sketch of the scenario and label the variables accordingly.

Let x represent the horizontal distance from P to the airplane, y the vertical distance from P to car A, and z the altitude of the airplane. The equation that relates the distance from car A to the plane can be written as:

[tex]d^2 = (x^2 + y^2 + z^2)[/tex]

We can use implicit differentiation to solve for the derivative of this equation with respect to time, which answers the “how fast” question. The derivative of the equation is:

x = 185t (horizontal distance from P to airplane)

y = 15 - 55t (vertical distance from P to car)

z = 2 (altitude of airplane)

Now we can substitute these expressions into our equation for the distance between the car and the airplane, and take the derivative with respect to time:

distance between car and airplane = sqrt((185t)^2 + (15 - 55t)^2 + 2^2)

d/dt(distance between car and airplane) = d/dt(sqrt((185t)^2 + (15 - 55t)^2 + 2^2))

= 1/2 * (185^2 * 2t + (15 - 55t)(-55)) / sqrt((185t)^2 + (15 - 55t)^2 + 2^2)

Evaluating this expression at t = 0 (the time when the car is at its closest point to the airplane), we get:

d/dt(distance between car and airplane) = 1/2 * (185^2 * 2(0) + (15 - 55(0))(-55)) / sqrt((185(0))^2 + (15 - 55(0))^2 + 2^2)

= 1/2 * (-825) / sqrt(15^2 + 2^2)

= -412.5 / sqrt (229)

The negative sign indicates that the distance between the car and the airplane is decreasing, as expected. Finally, we can take the absolute value of this expression to get the speed at which the distance is changing:

d/dt (distance between car and airplane)| = 412.5 / sqrt (229) ≈ 148.38 km/hr.

For more similar questions on differentiation

https://brainly.com/question/30572604

#SPJ11

Answer:

x=2 and y= ‐6

Step-by-step explanation:

Let the two numbers be 'x' and 'y'

Here, it says two numbers add up to make -4

So,

x+y= ‐4 .....equation (i)

Also, its says two numbers subtract to make 8

So,

x‐y=8 .....equation (ii)

We have,

x+y= ‐4 .....equation (i)

x‐y=8 .....equation (ii)

Subtracting equation (i) from equation (ii)

x‐y=8

x+y=‐4

-----------

‐2y=12

y=12/‐2

y= ‐6

Now, replacing value of x in equation (i)

x+y= -4

4x+(‐6) = -4

4x‐6= ‐4

x= -4+6

x= 2

Therefore the unknown numbers are 2 and ‐6

The graph of the function h(x) can be obtained using a horizontal stretch by a factor of 4, a horizontal translation to the right by 2 units, and a vertical translation 3 units up of the graph of g(x).

The graph of the function g(x) is a translation of the function f(x) 3 units up and 6 units to the left.

The graph of the function f(x) moves 6 units above the origin.

In Mathematics, the translation of a graph to the left simply means subtracting a digit from the value on the x-coordinate of the pre-image while the translation of a graph upward simply means adding a digit to the value on the y-coordinate (y-axis) of the pre-image.

In Mathematics, a horizontal translation to the left is modeled by this mathematical equation g(x) = f(x + N) while a vertical translation to the positive y-direction (upward) is represented or modeled by the following mathematical equation g(x) = f(x) + N.

Where:

Based on the information provided about the functions, we have the following:

f(x) = (x - 6)²

g(x) = x² + 3

h(x) = 4(x - 2)² + 3

Read more on translation here: brainly.com/question/4521517

#SPJ1

The statement that is true is: Player 2 has the highest likelihood of getting a hit in their at-bats.

By comparing the probabilities, we can interpret the likelihood of each player getting a hit in their at-bats. The highest probability indicates the highest likelihood of getting a hit.

Comparing the probabilities of the three players, we can see that:

Player 2 has the highest probability (5/8), which means they are the most likely to get a hit in their at-bats.

Player 1 has a lower probability (4/7) than Player 2, but a higher probability than Player 3. This means they are less likely to get a hit than Player 2, but more likely to get a hit than Player 3.

Player 3 has the lowest probability (3/6 = 1/2) of getting a hit, which means they are the least likely to get a hit in their at-bats.

Therefore, the statement that is true is: Player 2 has the   of getting a hit in their at-bats.

Learn more about probabilities at https://brainly.com/question/24756209

#SPJ1

The probability of reaching into the box and randomly drawing a chip number that is smaller than 212 is 0.9378

First, we should find the total number of chips in the box. The box contains 225 chips numbered from 1 to 225. Therefore, the probability of reaching into the box and randomly drawing a chip number that is smaller than 212 is 211/225.

The probability can be expressed as a simplified fraction or a decimal rounded to four decimal places. The probability is rounded to four decimal places is 0.9378.

The probability of drawing a chip number that is smaller than 212 from the box is 211/225 or 0.9378 (rounded to four decimal places).

To learn more about probability refer :

https://brainly.com/question/21200970

#SPJ11

Tonia's situation can be modeled through a seasonal function, specifically a periodic function. This is because her sales and profits vary over time in a predictable pattern that repeats each year.

A seasonal function is a type of mathematical function that models a repeating pattern or a cyclical behavior that occurs over a fixed interval of time. Seasonal functions are used to analyze and forecast patterns in time series data that have a clear seasonality or periodicity

One common type of periodic function is a sine or cosine function. These functions oscillate back and forth between two extreme values in a smooth, periodic way. In Tonia's case, her sales and profits might be modeled as a sine or cosine function that oscillates between high values during the summer months and lower values during the winter months.

Other types of periodic functions include sawtooth functions and square wave functions, which have a more abrupt change between their high and low values.

Learn more about seasonal function at https://brainly.com/question/30984532

#SPJ1

Answer:

Starting with the left side of the equation:

cosθ(1+tanθ) = cosθ(1+sinθ/cosθ) (since tanθ = sinθ/cosθ)

= cosθ + sinθ

Therefore, the left side of the equation is equal to the right side of the equation, which means that cosθ(1+tanθ) = cosθ+sinθ is true.

The required equation of straight line is y = 0.03x + 20.

What is an equation?

A mathematical equation states that two quantities or values are identical. Equations are used when more than one factor has to be examined in order to fully understand or explain a situation.

The general form of an equation is y = mx + b, where m is the slope of equation and b is a constant.

From the given graph we get 2 points.

i.e., (0, 20) and (2000, 80)

Slope of the line is

[tex]m=\frac{80-20}{2000-0}\\\ \ = \frac{60}{2000}\\ = \frac{6}{200} \\= \frac{3}{100}[/tex]

Then the equation will be

[tex]y-20=\frac{3}{100}(x-0)\\\Rightarrow y-20=0.03x\\\Rightarrow y-0.03x-20=0\\\Rightarrow y = 0.03x+20[/tex]

Therefore, the required equation is y = 0.03x + 20, calculating with the help of given graph.

Learn more about equation from the given link

brainly.com/question/10413253

#SPJ1

According to the information provided, the state is at point C, Michigan.

Based on the information provided, the state located at point C is Michigan.

Logical reasoning consists of aptitude questions that require logical analysis to arrive at a suitable solution. Most of the questions are conceptual, the rest are unconventional.

Logical thinking follows he is divided into two types.

Oral reasoning:

It is the ability to logically understand concepts expressed in words and solve problems. Oral reasoning tests your ability to extract information and meaning from sentences. Non-verbal thinking:

It is the ability to logically understand concepts represented by numbers, letters, and combinations of numbers and words and solve problems. Nonverbal reasoning tests your ability to reason and guide the logic and implications of information in a problem.

Much of the logic curriculum can be classified into his two types above. 

To know more about Logical reasoning visit:

https://brainly.com/question/14458200

#SPJ1

The exponential equation that fits the data points (0,35), (1,50), (2,100), (3,200), and (4,400) is y = 35 * (10/7)^x.

To find an exponential equation that fits the given data points, we can use the general form of an exponential equation:

y = a * b^x

where y is the dependent variable (in this case, the second coordinate of each data point), x is the independent variable (the first coordinate of each data point), a is the initial value of y when x is 0, and b is the growth factor.

Using the given data points, we can create a system of equations:

35 = a * b^0

50 = a * b^1

100 = a * b^2

200 = a * b^3

400 = a * b^4

The first equation tells us that a = 35, since any number raised to the power of 0 is 1. We can then divide the second equation by the first equation to get:

50/35 = b^1

Simplifying, we get:

10/7 = b

We can now substitute a = 35 and b = 10/7 into the remaining equations and solve for y:

y = 35 * (10/7)^x

This is the exponential equation that fits the given data points. We can use it to find the value of y for any value of x. This equation gives us a way to predict the value of y for any value of x.

To learn more about exponential click on,

https://brainly.com/question/11776332

#SPJ4

Answer:

actual length = 15 feet

Step-by-step explanation:

using the conversion

12 inches = 1 foot

the actual length  = 40 × scale length = 40 × 4.5 = 180 inches = 180 ÷ 12 = 15 feet

The quotient of 6. 208 × 10⁹ and 9. 7 × 10⁴ expressed in scientific notation is 6.4 × 10¹².

Quotient:

The quotient is the answer we get when we divide one number by another. For example, if we divide the number 6 by 3, we get 2, the quotient. The quotient can be integer or decimal. For an exact division like 10 ÷ 5 = 2, we have a whole number as the quotient, and for a division like 12 ÷ 5 = 2.4, the quotient is a decimal number. The quotient can be greater than the divisor, but always less than the dividend.

Based on the given conditions, Formulate:

6.208× 10⁹ /9.7×10⁴

Simply using exponent rule with same base:

[tex]a^n. a^m = a^(n+m)[/tex]

= 6.208 × 1/9.7

Now,

the sum or difference = [tex]6.208*\frac{1}{9.7}[/tex] × 10¹³

Now solving, we get:

6.208/9.7 × 10¹³

Converting fraction into decimal, we get:

  0.64× 10¹³

⇒ 6.4 × 10¹²

Therefore,

The quotient of 6. 208 × 10⁹ and 9. 7 × 10⁴ expressed in scientific notation is 6.4 × 10¹².

Learn more about Quotient:

https://brainly.com/question/16134410

#SPJ4

The required ratio of the surface area of the given pyramids is (A) 3:2.

A ratio can be used to show a relationship or to compare two numbers of the same type.

To compare things of the same type, ratios are utilized.

We might use a ratio, for example, to compare the proportion of boys to girls in your class.

If b is not equal to 0, an ordered pair of numbers a and b, denoted as a / b, is a ratio.

A proportion is an equation that equalizes two ratios.

For illustration, the ratio may be expressed as follows: 1: 3 in the case of 1 boy and 3 girls (for every one boy there are 3 girls)

So, the given surface area is:

- 21 in

- 14 in

Now, calculate the ratio as:

= 21/14

= 3/2

= 3:2

Therefore, the required ratio of the surface area of the given pyramids is (A) 3:2.

Know more about ratios here:

https://brainly.com/question/2328454

#SPJ1

Using the equation [tex]y = $7.32(1.04)^t[/tex], the amount of time after which the employee will be earning $10.00 is about 9.64 years, or approximately 9 years and 8 months.

What is an equation?

A mathematical definition of an equation is a claim that two expressions are equal when they are joined by the equals sign ("=").

We can start by setting up the equation for the employee's hourly wage y after t years -

[tex]y = $7.32(1.04)^t[/tex]

We want to find the amount of time t after which the employee will be earning $10.00 per hour, so we can set y equal to 10 and solve for t -

[tex]10 = $7.32(1.04)^t[/tex]

Dividing both sides by $7.32, we get -

[tex]1.367 = 1.04^t[/tex]

Taking the natural logarithm of both sides, we get -

[tex]ln(1.367) = ln(1.04^t)[/tex]

Using the property of logarithms that [tex]ln(a^b) = b ln(a)[/tex], we can simplify the right-hand side -

ln(1.367) = t ln(1.04)

Dividing both sides by ln(1.04), we get -

t = ln(1.367)/ln(1.04) ≈ 9.64

Therefore, the employee will be earning $10.00 per hour after about 9.64 years.

To learn more about equation from the given link

https://brainly.com/question/28871326

#SPJ1

The Dow Jones average after 4 more weeks of the same rate of drop would be 11,167.

What is average?

Average, also known as mean, is a measure of central tendency that represents the typical or common value in a set of data. It is calculated by adding up all the values in a data set and then dividing the sum by the total number of values.

To calculate the drop in the Dow Jones average, we subtract the initial value from the final value:

Drop = Final Value - Initial Value

Drop = 12,503 - 12,837

Drop = -334

So the Dow Jones average dropped by 334 points in one week.

If the price continued to drop at the same rate for 4 more weeks, then the total drop after 5 weeks would be:

Total Drop = 5 x Drop

Total Drop = 5 x (-334)

Total Drop = -1670

To calculate the Dow Jones average after 4 more weeks, we need to subtract the total drop from the initial value:

New Dow Jones Average = Initial Value - Total Drop

New Dow Jones Average = 12,837 - 1,670

New Dow Jones Average = 11,167

Therefore, the Dow Jones average after 4 more weeks of the same rate of drop would be 11,167.

To know more about average and given link below -

https://brainly.com/question/24057012

#SPJ1

Answer: The other leg is 7 m, and the hypotenuse is 7√2 m.

Step-by-step explanation:

This is just a rule that in all cases, the two legs are equal and the hypotenuse is equal to the length of a leg times the square root of 2.

Hope this helps :)

555 centigrams = 55.5 GRAMS

The metric system is based on multiples of 10, where each unit is 10 times larger or smaller than the previous one. In this system, "centi-" means one hundredth, so 1 centigram is one hundredth of a gram. Therefore, 555 centigrams is equal to 5.55 grams (since there are 100 centigrams in 1 gram).

On the other hand, "deci-" means one-tenth, so 1 decigram is one-tenth of a gram. Therefore, 555 centigrams is also equal to 55.5 decigrams (since there are 10 decigrams in 1 gram).

In summary, 555 centigrams is equal to:

55.5 decigrams

5.55 grams

555 centigrams is equal to = 55.5 decigrams

1 cg is equal to 10 dg, therefore 555 cg is equivalent to 55.5 dg.

1 Centigram = 1 x 10 = 10 Milligrams

555 Centigrams = 555 / 10 = 55.5 Decigrams

Form refers to three-dimensional objects with depth, while shape pertains to the two-dimensional outline or boundary of an object.

We have,

In the context of geometry and visual representation, the terms "form" and "shape" have distinct meanings and characteristics.

Form generally refers to a three-dimensional object that has depth, such as a solid object or a structure with volume.

It encompasses objects that have length, width, and height, and it extends beyond a two-dimensional representation.

Form can have irregular or complex shapes and is not limited to a specific number of sides.

Shape, on the other hand, refers to the two-dimensional outline or boundary of an object.

It is limited to the external appearance or silhouette of an object without considering its depth or volume.

Shapes are typically described by their attributes, such as the number of sides (e.g., triangle, square) or specific geometric properties (e.g., circle, rectangle).

Thus,

Form refers to three-dimensional objects with depth, while shape pertains to the two-dimensional outline or boundary of an object.

Learn more about form and shape here:

https://brainly.com/question/25440372

#SPJ12

Therefore, the value of 'a' when the shaded cross-sections of the solids have the same area is

:a = √(4A/π).

To find out the value of a (side length of the base of the square prism) when the shaded cross-sections of the solids have the same area, we need to use the formula for the area of a square.

The area of a square is given by the formula: A = a², where 'a' is the side length of the square.

Now, let's look at the two solids given in the question.

The first solid is a square prism with base 'a' and height 'a'.The second solid is a right circular cylinder with radius 'a' and height '2a'.The cross-section of the square prism is a square with side length 'a'.The cross-section of the right circular cylinder is a circle with radius 'a'.

Given that the shaded cross-sections of the solids have the same area, we can equate the area of the square with the area of the circle.

A = πr², where 'r' is the radius of the circle Substituting the values of 'r' and 'a', we get:A = πa²/4 = a²/4Multiplying both sides by 4, we get:4A = πa²

Now we can solve for 'a' by taking the square root of both sides a = √(4A/π).

for such more questions on square prism

brainly.com/question/13048128

#SPJ11

Let's the width of the given rectangle be x. Then the length will be 5x.

We know that,

[tex] \bf \implies Perimeter_{( Rectangle)} = 2 ( Length + Width) [/tex]

[tex] \sf \implies 2( x+5x) = 72 [/tex]

[tex] \sf \implies 2\times 6x = 72 [/tex]

[tex] \sf \implies 12x =72 [/tex]

[tex] \bf \implies x = 6 [/tex]

Hence, the width of the rectangle is 6 m and the length is 5*6 =30 m

[tex]\bf\implies Area_{( Rectangle) }= Length \times Width [/tex]

[tex] \bf \implies Area _{( Rectangle)} = 30 \times 6 [/tex]

[tex] \bf \implies Area _{( Rectangle) }= 180 m^2 [/tex]

Therefore, the area of the given rectangle is 180 metre square.

Answer: The null hypothesis (H0) is the statement that there is no significant difference between the proportion of people in the region with the O positive blood type (p) and the population proportion (p0) of 0.38.

The null hypothesis is usually denoted as:

H0: p = p0

In this case, p0 is given as 0.38, so the correct answer is:

H0: p = 0.38

Step-by-step explanation:

Answer: Let's denote the number of additional houses sold after the first one as "x".

Since the commission for the first house sold is GHc3750, the commission for selling x additional houses is GHc500x.

Therefore, the total commission earned by selling x additional houses is:

GHc3750 + GHc500x

We want to find the value of x that makes the total commission equal to GHc6500. Setting up an equation and solving for x, we get:

GHc3750 + GHc500x = GHc6500

GHc500x = GHc2750

x = 5.5

Since we can't sell half of a house, we round up to the nearest whole number. Therefore, the estate dealer must sell a total of 6 houses (including the first one) to reach a total commission of GHc6500.

Step-by-step explanation:

On the number line, move 3 units to the left. End at -9. The dolphin was 9 feet below sea level.

What is location?

Location refers to the specific position or coordinates of an object or point in space or time. It can refer to the physical location of an object or place on Earth, such as a building or city, or the position of an astronomical object in the universe.

In a mathematical context, location is often expressed as a set of coordinates or points in a coordinate system.

Location is an important concept in various fields, including geography, cartography, astronomy, and mathematics, and is often used to describe and locate objects, places, or events in a precise and accurate manner.

To know more about Location related questions, visit:

https://brainly.com/question/11718756

#SPJ1

Answer:

Isiah Thomas

Step-by-step explanation:

I amazing fact

Answer:

the correct answer is 4

Step-by-step explanation:

yea sorry i don’t know step-by-step

Interval notation is a way to represent an interval of real numbers on the number line. Set notation is a way to represent a set of elements.

Interval notation is a way to represent an interval of real numbers on the number line.

The notation uses parentheses, brackets, and infinity symbols to indicate whether the endpoints of the interval are included or excluded from the set of numbers.

For example, [3, 8) represents the interval of real numbers from 3 (included) to 8 (excluded), while (-∞, 4) represents the interval of real numbers less than 4 (excluding 4), and extending to negative infinity.

Set notation is a way to represent a set of elements. It uses curly braces to enclose the elements of the set and can include various symbols to indicate properties of the set.

For example, {2, 3, 5, 7, 11} represents the set of prime numbers less than 12, while {x | x is an even number} represents the set of even numbers.

The vertical bar | is used to separate the variable (x in this case) from the condition that must be met for elements to be included in the set (x is an even number).

Learn more about set notation on:

https://brainly.com/question/24462379

#SPJ1

then the area would be: [tex]Area=\frac{(a+b)}{2*h}[/tex] = (16 ft + 10 ft)/2 x 15 ft = 150 ft²

Area is a mathematical term that refers to the measurement of the size or extent of a two-dimensional region or surface. It is typically expressed in square units, such as square meters (m²), square centimeters (cm²), square feet (ft²), or square inches (in²). The area of a shape is determined by multiplying the length and width of the shape in the case of a rectangle or square, or by using more complex formulas for irregular shapes such as circles, triangles, or polygons. The concept of area is important in various fields such as mathematics, geometry, physics, engineering, and architecture, among others.

by the question.

. If we assume that these are the dimensions of a rectangle, then the area would be:

Area = length x width = 20 ft x 12 ft = 240 ft²

However, if we assume that the area is a trapezoid with a height of 15 ft, and the parallel sides of length 16 ft and 10 ft.

To learn more about height:

https://brainly.com/question/10726356

#SPJ1