Answer:
C
Oxygen gas is limiting.
C(s) + O
2
→CO
2
(g)
No. of moles of carbon =
12
36
=3 moles
No. of moles of oxygen =
32
32
=1 moles
So, 2 moles of carbon is left and oxygen will be completed.
So, O
2
is limiting reagent.
Answer:
14.5
Explanation:
not sure how I got it but I hope this helped!
Can someone help me with problem 21.105? Many thanks!
You prepare a solution by dissolving 25.3 g sucrose (C12H22O11) 705 mL of water. Calculate the molarity of the solution.
Answer:
0.105 M
Explanation:
First we convert 25.3 grams of sucrose into moles, using sucrose's molar mass:
Molar Mass of C₁₂H₂₂O₁₁ = 342.3 g/mol25.3 g C₁₂H₂₂O₁₁ ÷ 342.3 g/mol = 0.0739 mol C₁₂H₂₂O₁₁Now we calculate the molarity of the solution, using the given volume and the calculated number of moles:
Converting 705 mL ⇒ 705 mL / 1000 = 0.705 LMolarity = 0.0739 mol / 0.705 L = 0.105 MThe reversible reaction: 2SO2(g) O2(g) darrw-tn.gif 2SO3(g) has come to equilibrium in a vessel of specific volume at a given temperature. Before the reaction began, the concentrations of the reactants were 0.060 mol/L of SO2 and 0.050 mol/L of O2. After equilibrium is reached, the concentration of SO3 is 0.040 mol/L. What is the equilibrium concentration of O2
Answer:
0.030 M
Explanation:
Step 1: Make an ICE chart
2 SO₂(g) + O₂(g) ⇄ 2 SO₃(g)
I 0.060 0.050 0
C -2x -x +2x
E 0.060-2x 0.050-x 2x
Step 2: Find the value of x
The concentration of SO₃ at equilibrium is 0.040 mol/L. Then,
2x = 0.040
x = 0.020
Step 3: Calculate the concentration at equilibrium of O₂
[O₂] = 0.050 - x = 0.050 - 0.020 = 0.030 M
The equilibrium concentration of oxygen is 0.030 M.
A reversible reaction is a reaction that can move either in the forward or in the reverse direction. We have the reaction; 2SO2(g) + O2(g) ⇄ 2SO3(g). We can now set up the ICE table as shown below;
2 SO₂(g) + O₂(g) ⇄ 2 SO₃(g)
I 0.060 0.050 0
C -2x -x +2x
E 0.060-2x 0.050-x 2x
At equilibrium;
2x = 0.040 M
x = 0.040 M/2 = 0.020 M
For oxygen;
0.050-x
0.050 M - 0.020 M = 0.030 M
Learn more about equilibrium: https://brainly.com/question/953809
1.36g H2 is allowed to react with 10.1g N2 producing 2.05g NH3 What is the theoretical yield in grams for this reaction under the given conditions?
Express your answer to three significant figures and include the appropriate units.
here's the answer to your question
Calculate the boiling point of a 3.5 % solution (by weight) of sodium chloride in water.
Kb of H2O = 0.512 oC/M
Answer: The boiling point of the solution is [tex]101.02^oC[/tex]
Explanation:
We are given:
3.5 % (by weight) NaCl
This means that 3.5 g of NaCl is present in 100 g of solution
Mass of solvent = Mass of solution - Mass of solute
Mass of solvent (water) = (100 - 3.5) g = 96.5 g
Elevation in the boiling point is defined as the difference between the boiling point of the solution and the boiling point of the pure solvent.
The expression for the calculation of elevation in boiling point is:
[tex]\text{Boiling point of solution}-\text{boiling point of pure solvent}=i\times K_b\times m[/tex]
OR
[tex]\text{Boiling point of solution}-\text{Boiling point of pure solvent}=i\times K_f\times \frac{m_{solute}\times 1000}{M_{solute}\times w_{solvent}\text{(in g)}}[/tex] ......(1)
where,
Boiling point of pure solvent (water) = [tex]100^oC[/tex]
Boiling point of solution = ?
i = Vant Hoff factor = 2 (for NaCl)
[tex]K_b[/tex] = Boiling point elevation constant = [tex]0.512^oC/m[/tex]
[tex]m_{solute}[/tex] = Given mass of solute (NaCl) = 3.5 g
[tex]M_{solute}[/tex] = Molar mass of solute (NaCl) = 36.5 g/mol
[tex]w_{solvent}[/tex] = Mass of solvent (water) = 96.5 g
Putting values in equation 1, we get:
[tex]\text{Boiling point of solution}-(100)=2\times 0.512\times \frac{3.5\times 1000}{36.5\times 96.5}\\\\\text{Boiling point of solution}=(1.02+100)^oC\\\\\text{Boiling point of solution}=101.02^oC[/tex]
Hence, the boiling point of the solution is [tex]101.02^oC[/tex]
Ethylene glycol (C2H6O2) is mixed with water to make auto engine coolants. How many grams of C2H6O2 are in 5.00 L of a 6.00 M aqueous solution
Answer:
1860g.
Explanation:
It is known that the molar mass of C2H6O2 is 62.08 g/mol.,
Now to solve for the number of moles of solute, one must multiply both
sides by the volume:
moles of solute = (6.00 M)(5.00 L) = 30.0 mol
Notice since the definition of molarity is mol/L, the
product M × L gives mol, a unit of amount.
Use the molar mass of C3H8O3, one can convert mol to g:
Mass m =30 mol × 62.08 g/mol
m = 1860g.
Hence, there are 1,860 g of C2H6O2 in the specified amount of
engine coolant.
Sobre ações relacionadas ao aquecimento global, assinale somente as alternativas corretas:
a) ( x) As ações humanas não influenciam no aumento da temperatura do planeta.
b) ( ) As mudanças climáticas são intensificadas pela emissão de gases das atividades humanas.
c) ( ) A queima de combustíveis fósseis e de florestas são as principais ações humanas que liberam gases que intensificam o efeito estufa.
d) ( ) O efeito estufa é um fenômeno natural.
e) ( ) Se as águas dos oceanos ficarem mais quentes, os furacões não terão tanta força.
Answer:
123456788012346778901234567890
from kinatic point of view explain the change from solid to liquied based on the effect of change of tempreture.
Answer:
Temperature affects the kinetic energy in a gas the most, followed by a comparable liquid, and then a comparable solid. The higher the temperature, the higher the average kinetic energy, but the magnitude of this difference depends on the amount of motion intrinsically present within these phases.
Explanation:
Liquids have more kinetic energy than solids. When a substance increases in temperature, heat is being added, and its particles are gaining kinetic energy. Because of their close proximity to one another, liquid and solid particles experience intermolecular forces. These forces keep particles close together.
A certain first order reaction has a half-life of 54.3 s. How long will it take (in s) for the reactant concentration to decrease from 6.50 M to 2.27 M
Answer:
[tex]t=82.2s[/tex]
Explanation:
From the question we are told that:
Half life [tex]t_{1/2}=54.3s[/tex]
Change in concentration [tex]\triangle conc=6.50 M to 2.27 M[/tex]
Generally the equation for half life is mathematically given by
[tex]k=\frac{2.303}{t}*log\frac{C_1}{C_2}[/tex]
Where
[tex]K=\frac{0.693}{t_{1/2}}[/tex]
[tex]K=\frac{0.693}{54.3}[/tex]
[tex]K=0.0128[/tex]
Therefore
[tex]0.0128=\frac{2.303}{t}*log\frac{6.50}{2.27}[/tex]
[tex]t=82.2s[/tex]
What kind of element is Phosphorus is
Answer:
NON-METAL
Explanation:
Phosphorus is a non-metal that sits just below nitrogen in group 15 of the periodic table. This element exists in several forms, of which white and red are the best known.
At 35 C, a sample of gas has a volume of 256 ml and a pressure of 720.torr. What would the volume
be if the temperature were changed to 22 C and the pressure to 1.25 atmospheres?
Answer: Volume would be 196.15 mL if the temperature were changed to [tex]22^{o}C[/tex] and the pressure to 1.25 atmospheres.
Explanation:
Given: [tex]T_{1} = 35^{o}C = (35 + 273) K = 308 K[/tex], [tex]V_{1}[/tex] = 256 mL,
[tex]P_{1}[/tex] = 720 torr (1 torr = 0.00131579 atm) = 0.947368 atm
[tex]T_{1} = 22^{o}C = (22 + 273) K = 295 K[/tex], [tex]P_{2} = 1.25 atm[/tex]
Formula used to calculate volume is as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{1 atm \times 256 mL}{308 K} = \frac{1.25 atm \times V_{2}}{295 K}\\V_{2} = 196.15 mL[/tex]
Thus, we can conclude that the volume would be 196.15 mL if the temperature were changed to [tex]22^{o}C[/tex] and the pressure to 1.25 atmospheres.
A hydrocarbon contains only the elements____?
Explanation:
elements are carbons and hydrogen
Answer:
Carbon and Hydrogen.
Explanation:
It’s in the name Hydro (H) Carbon (C)
How many atoms are in protons
Answer:
the number of protons in a atom is unique to each element
Explanation:
protons are about 99.86% as massive neutrons. The number of protons in a atom is unique to each element .For example carbon atoms have six protons in an atom is referred to as the atomic number of that element
The absolute temperature of a gas is increased four times while maintaining a constant volume. What happens to the
pressure of the gas?
Olt decreases by a factor of four.
O It increases by a factor of four.
It decreases by a factor of eight
It increases by a factor of eight.
Answer:
The pressure increases by a factor of four.
Explanation:
Let's consider a gas at a given temperature and pressure (T₁, P₁). The absolute temperature of a gas is increased four times (T₂ = 4 T₁) while maintaining a constant volume. We can assess the effect on the pressure (P₂) by using Gay Lussac's law.
P₁/T₁ = P₂/T₂
P₂ = P₁ × T₂/T₁
P₂ = P₁ × 4 T₁/T₁
P₂ = 4 P₁
The pressure increases by a factor of four.
How many of NaCl are in 200 ml of a 0.100 M NaCl solution?
Answer:
question not specific..grams? mols? molecules/atoms/ions?
Explanation:
0.100 mol/ dm³ NaCl
200/1000 = 0.2 dm³
Na = 23
Cl = 35.5
molar mass = 58.5g/mol
gNaCl = x
58.5g/mol * 0.100mol/dm³ * 0.2dm³
gNaCl = 1.17 grams
For mols
58.5g/mol ÷ 1.17g = 50molNaCl
for molecules/atoms/ions
50molNaCl * 6.022 x 10 ^-23 =795.47molecules/atoms/ions
Which technique is best suited to each application?
a. In the second week of a four week biochemistry experiement, you have 50 fractions collected from a gel filtration column to determine which fractions contain lactate dehydrogenase. You are given only 400 uL of 0.100 mg/mL lactate dehydrogenase to prepare your calibration curve. 96-well microplate
b. Your environmental lab has 2000 samples to be analyzed for trace ammonia by next week. discrete analyzer.
c. Twenty water samples must be analyzed for Cl-, NH3, PO3-, and So during each work shift. flow injection analysis colorimeter.
d. Your professor heard you will be hiking the Appalachian Trail next summer. She asks you to collect 100-mL water samples from the ten streams with the highest concentration of phosphate.
Answer:
a. discrete analyzer
b. 96 well microplate
c. flow injection analysis
d. colorimeter
Explanation:
96 well microplates are instruments designed for sample collection and throughput screening. If an environment lab has collected 2000 samples then 96 well microplate is best suited application. Discrete analyzer is automated chemical analyzer which performs test on samples kept in discrete cells. Flow injection analysis is approach used for chemical analysis. It injects a plug of sample into a flowing carrier stream. Colorimeter is a device which measures absorbance of wavelength of light by a specific solution.
Write a balanced half-reaction for the reduction of liquid water to gaseous hydrogen in basic aqueous solution. Be sure to add physical state symbols where appropriate.
Answer:
2 H₂O(l) + 2 e⁻ ⇒ H₂(g) + 2 OH⁻(aq)
Explanation:
Let's consider the unbalanced half-reaction for the reduction of liquid water to gaseous hydrogen in basic aqueous solution.
H₂O(l) ⇒ H₂(g)
First, we will perform the mass balance. We will balance oxygen atoms by multiplying H₂O by 2 and adding 2 OH⁻ to the right side.
2 H₂O(l) ⇒ H₂(g) + 2 OH⁻(aq)
Then, we perform the charge balance by adding 2 electrons to the left side.
2 H₂O(l) + 2 e⁻ ⇒ H₂(g) + 2 OH⁻(aq)
An HCl solution has a concentration of 0.09714 M. Then 10.00 mL of this solution was then diluted to 250.00 mL in a volumetric flask. The diluted solution was then used to titrate 250.0 mL of a saturated AgOH solution using methyl orange indicator to reach the endpoint.
Required:
a. What is the concentration of the diluted HCl solution?
b. If 7.93 mL of the diluted HCl solution was required to reach the endpoint, what is the concentration of OH- in solution?
Answer:
A. Concentration of diluted acid = 0.00389 M
B. Concentration of OH- in AgOH solution = 0.00012 M
Explanation:
A. Using the dilution formula: C1V1 = C2V2
Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
From the data provided, C1 = 0.09714 M, V1 = 10.0 mL, V2 = 250.0 mL and C2 = ?
Making C2 subject of the formula above; C2 = C1V1/V2
C2 = 0.09714 M × 10 / 250 = 0.00389 M
B. Equation of the neutralization reaction is given below:
HCl + AgOH ---> AgCl + H₂O
From the equation, 1 mole of acid neutralizes 1 mole of base
Using the titration formula; CaVa/CbVb = na/nb
Where Ca is the concentration of the acid HCl = 0.00389 M
Va is the volume of acid = 7.93 mL
Cb is the concentration of base, AgOH = ?
Vb is volume of base = 250.0 mL
na/nb = mole ratio of acid and base = 1
Making Cb subject of the formula in the equation above; Cb = CaVa/Vb
Cb = 0.00389 M × 7.93 / 250
Cb = 0.00012 M
Which compound is a glycol? a. CH 3 ―CH 2 ―CH 2 ―CHO b. CH 3 —CH 2 —O—CH 2 —CH 3 c. HOH 2 C―CH 2 ―CH 2 ―CH 2 OH d. CH 3 —CH 2 —CH 2 —CH 2 OH
Answer:
c. HOH2C―CH2―CH2―CH2OH
Explanation:
0.28 M Ca(NO3)2
Express your answer using two significant figures.
Answer:
Mass=Moles × RFM
Mass= 0.28M× 164
Mass= 45.92 grammes
what would happen if the number of protons and electrons in the Atom did change
When heated, carboxylic salts in which there is a good leaving group on the carbon beta to the carbonyl group undergo decarboxylation/elimination to give an alkene. Draw the structures of the products expected when this compound is heated.
Answer:
i dont know mate
Explanation:
You need to produce a buffer solution that has a pH of 5.50. You already have a solution that contains 10 mmol (millimoles) of acetic acid. How many millimoles of acetate (the conjugate base of acetic acid) will you need to add to this solution?
Answer:
56.9 mmoles of acetate are required in this buffer
Explanation:
To solve this, we can think in the Henderson Hasselbach equation:
pH = pKa + log ([CH₃COO⁻] / [CH₃COOH])
To make the buffer we know:
CH₃COOH + H₂O ⇄ CH₃COO⁻ + H₃O⁺ Ka
We know that Ka from acetic acid is: 1.8×10⁻⁵
pKa = - log Ka
pKa = 4.74
We replace data:
5.5 = 4.74 + log ([acetate] / 10 mmol)
5.5 - 4.74 = log ([acetate] / 10 mmol)
0.755 = log ([acetate] / 10 mmol)
10⁰'⁷⁵⁵ = ([acetate] / 10 mmol)
5.69 = ([acetate] / 10 mmol)
5.69 . 10 = [acetate] → 56.9 mmoles
To what volume should you dilute 55 mL of 12 M stock HNO3 solution to obtain a 0.145 HNO3 solution?
Answer:
4552 mL
Explanation:
From the question given above, the following data were obtained:
Volume of stock solution (V₁) = 55 mL
Molarity of stock solution (M₁) = 12 M
Molarity of diluted solution (M₂) = 0.145 M
Volume of diluted solution (V₂) =?
The volume of the diluted solution can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
12 × 55 = 0.145 × V₂
660 = 0.145 × V₂
Divide both side by 0.145
V₂ = 660 / 0.145
V₂ ≈ 4552 mL
Thus, the volume of the diluted solution is 4552 mL
A mixture of hydrogen and argon gases, at a total pressure of 980 mm Hg, contains 0.291 grams of hydrogen and 5.62 grams of
argon. What is the partial pressure of each gas in the mixture?
PH2
Par
mm Hg
mm Hg
Answer:
Partial pressure of H₂ = 499 mmHg
Partial pressure of Ar = 481 mmHg
Explanation:
We'll begin by calculating the number of mole of each gas. This can be obtained as follow:
For Hydrogen:
Molar mass of H₂ = 2 × 1 = 2 g/mol
Mass of H₂ = 0.291 g
Mole of H₂ =?
Mole = mass /molar mass
Mole of H₂ = 0.291/ 2
Mole of H₂ = 0.1455 mole
For Argon:
Molar mass of Ar = 40 g/mol
Mass of Ar = 5.62 g
Mole of Ar =?
Mole = mass /molar mass
Mole of Ar = 5.62 / 40
Mole of Ar = 0.1405 mole
Next, we shall determine the mole fraction of each gas. This can be obtained as follow:
Mole of H₂ = 0.1455 mole
Mole of Ar = 0.1405 mole
Total mole = 0.1455 + 0.1405
Total mole = 0.286 mole
Mole fraction of H₂ (nₕ₂) = mole of H₂ / total mole
Mole fraction of H₂ (nₕ₂) = 0.1455/0.286
Mole fraction of H₂ (nₕ₂) = 0.509
Mole fraction of Ar (nₐᵣ) = mole of Ar / total mole
Mole fraction of Ar (nₐᵣ) = 0.1405/0.286
Mole fraction of Ar (nₐᵣ) = 0.491
Finally, we shall determine the partial pressure of each gas. This can be obtained as follow:
For Hydrogen:
Mole fraction of H₂ (nₕ₂) = 0.509
Total pressure (Pₜ) = 980 mmHg
Partial pressure of H₂ (Pₕ₂) =?
Pₕ₂ = nₕ₂ × Pₜ
Pₕ₂ = 0.509 × 980
Partial pressure of H₂ (Pₕ₂) = 499 mmHg
For Argon:
Partial pressure of H₂ (Pₕ₂) = 499 mmHg
Total pressure (Pₜ) = 980 mmHg
Partial pressure of Ar (Pₐᵣ) =?
Pₜ = Pₕ₂ + Pₐᵣ
980 = 499 + Pₐᵣ
Collect like terms
980 – 499 = Pₐᵣ
481 = Pₐᵣ
Partial pressure of Ar (Pₐᵣ) = 481 mmHg
SUMMARY:
Partial pressure of H₂ (Pₕ₂) = 499 mmHg
Partial pressure of Ar (Pₐᵣ) = 481 mmHg
What is the molarity of a solution containing 150 g of zinc sulfate (ZnSO4) per liter?
Answer:
0.93 M
Step-by-step Explanation:
First, we have to calculate the molar mass (MM) of ZnSO₄ by using the molar mass of each chemical element:
MM(ZnSO₄) = 65.4 g/mol Zn + 32 g/mol S + (16 g/mol x 4) = 161.4 g/mol
Then, we divide the mass of ZnSO₄ into its molar mass to obtain the number of moles:
moles ZnSO₄ = mass/MM = 150 g/(161.4 g/mol)= 0.93 mol
Since the molarity of a solution expresses the number of moles of solute per liter of solution, we calculate the molarity (M) as follows:
M = moles ZnSO₄/1 L = 0.93 mol/1 L = 0.93 M
A 2.584 g sample of a compound containing only carbon, hydrogen, and oxygen is burned in an excess of dioxygen, producing 5.874 g CO2 and 2.404 g H2O. What mass of oxygen is contained in the original sample?a. 0.7119 g.b. 0.8463 g.c. 0.29168 g.d. 0.1793 g.e. 0.6230 g.
Answer:
a. 0.7119 g
Explanation:
To solve this question we need to know that all carbon of the compound will react producing CO2 and all Hydrogen producing H2O.
Thus, we can find the mass of C and the mass of H and by difference regard to the 2.584g of the compound we can find the mass of oxygen as follows:
Moles CO2 = Moles C -Molar mass: 44.01g/mol-
5.874g CO2 * (1mol/44.01g) = 0.1335 moles CO2 = 0.1335 moles C
Mass C -Molar mass: 12.01g/mol-:
0.1335 moles C * (12.01g /mol) = 1.6030g C
Moles H2O -Molar mass: 18.01g/mol-
2.404gH2O * (1mol / 18.01g) = 0.1335 moles H2O * (2mol H / 1mol H2O) = 0.267 moles H
Mass H -Molar mass: 1g/mol-
0.267 moles H * (1g/mol) = 0.2670g H
Mass Oxygen =
Mass O = 2.584g compound - 1.6030g C - 0.2670g H
Mass O = 0.714g O ≈
a. 0.7119 gIn aqueous solution the Ni2" ion forms a complex with four ammonia molecules. Write the formation constant expression for the equilibrium between the hydrated metal ion and the aqueous complex. Under that, write the balanced chemical equation for the first step in the formation of the complex K,=________.
Answer:
The correct equation is "[tex]\frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]".
Explanation:
According to the question,
Throughout an aqueous solution, [tex]Ni^{2+}[/tex] exist as [tex][Ni(H_2O)_4]^{2+}[/tex]
So,
⇒ [tex][Ni(H_2O)_4]^{2+} + 4NH_3 \rightleftharpoons [Ni(NH_3)_4]^{2+} + H_2O[/tex]
⇒ [tex]K_f = \frac{[Ni(NH_3)_4]^{2+}}{[Ni(H_2O)_4^{2+}] [NH_3]^4}[/tex]
Here, we have excluded [tex][H_2O][/tex] as concentration of water will be const.
Now,
This formation of [tex][Ni(NH_3)_4]^{2+}[/tex] proceeds via several steps,
Step 1:
⇒ [tex][Ni(H_2O)_4]^{2+}+NH_3 \rightleftharpoons [Ni(H_2O)_3 (NH_3)]^{2+} + H_2O[/tex]
⇒ [tex]K_1 = \frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]
Leaming Task 1:
Distinguish the process as spontaneous or non-spontaneous process. Write S it spontaneous and NSi non-spontaneous
on the bionk.
1. Melling ofice
2 Ruisting of ton
3. Marble going down the spiral.
4. Going up the
& Keeping the food fresh from spolage
Solution :
Spontaneous Process
A spontaneous process is defined as the process that occurs without the help of any external aid or inputs. A spontaneous process is a natural process which occurs naturally in the environment.
Non Spontaneous process
A non spontaneous process is a process which does not occur naturally. Some inputs are provided for the process to occur. Energy from external source is applied into the process to start the process.
The following processes are :
1. Melling of ice ---- Spontaneous
2 Rusting of iron --- Spontaneous
3. Marble going down the spiral. --- spontaneous
4. Going up the hill ---- Non spontaneous
5. Keeping the food fresh from spoilage --- Non spontaneous
give one use of zinc
