Why is a person not a good blackbody radiator?
O A. A person emits only visible light.
OB. A person emits only infrared radiation.
O C. A person absorbs most of the light that hits him or her.
O D. A person reflects little of the light that hits him or her.
Answer:
O C. A person absorbs most of the light that hits him or her.
Explanation:
Answer:
Option D hope it's helpful mark me as brainlistA partially inflated balloon is faded over the open end of a glass beaker that contains water the beaker is placed in an ice bath which cause the water and causes the balloon to the flea what are the correct designs for the heat and work changes to the beaker and balloon system
Answer:
a
Explanation:
How can you increase efficiency of a simple machine??
Answer:
Efficiency can be increase by using rollers in conjunction with the inclined plane. Wedge. The wedge is an adaptation of the inclined plane. It can be used to raise a heavy load over a short distance or to split a log.
Explanation:
Hope it helps
A body of mass 5 kg moving with velocity 10m/s attains a velocity of 30m/s in 20 seconds, after applying the force. The amount of force applied will be:
a 10N
b 20N
c 5N
d 15N
Answer↷
c) 5N
➦I hope it seemed helpful to you!
An elevator of 3 × 10^4N is raised to a height of 100m in 20s . The work done by electric motor is equivalent to?
Answer:
there it is fella tried on ma own observation
A young student drops a stone off the side of a cliff that is 41 meters high. How long does it take the stone to hit the ground below?
A)
2.89 s
B)
8.36 s
C)
3.20 s
D)
2.04 s
Brass is made by melting a mixture which contain 67% by mass of copper and 33% by mass of zinc if no change in volume.Calculate the density of brass
Answer:
The density of brass is approximately 8,261.73 kg/m³
Explanation:
The percentage composition by mass of brass is given as follows;
The percentage by mass of copper = 67%
The percentage by mass of zinc = 33%
The density of copper, ρ₁ = 8.96 g/cm³
The density of zinc, ρ₂ = 7.133 g/cm³
Therefore, where we have, m = 100 g of brass, we have;
The mass of copper, m₁ = 67 g
The volume of copper, V₁ = m₁/ρ₁
∴ V₁ = 67 g/(8.96 g/cm³) ≈ 7.47767857 cm³
The volume of zinc, V₂ = m₂/ρ₂
∴ V₂ = 33 g/(7.133 g/cm³) ≈ 4.62638411 cm³
The volume of the brass, V = V₁ + V₂
V = 7.47767857 cm³ + 4.62638411 cm³ ≈ 12.104 cm³
The density of brass, ρ = m/V
∴ ρ = 100 g/(12.104 cm³) ≈ 8.26 g/cm³
The density of brass, ρ ≈ 8.26 g/cm³ = 8,261.73 kg/m³
ASAPP PLS HELP MEE
The density of aluminum is 2.7 g/cm^3. Which of the following statement is true?
A) 1 g of aluminium has a volume of 1 cm^3
B) 2.7 g of aluminium has a volume of 1 cm^3
C) 1 g of aluminium has a volume of 2.7 cm^3
D) 2 g of aluminium has a volume of 7 cm^3
Answer:
B) 2.7 g of aluminium has a volume of 1 cm^3
Explanation:
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
If the density of aluminum is 2.7 g/cm³, it simply means that 2.7 g of aluminium has a volume of 1 cm³
Check:
Given the following data;
Mass = 2.7 grams
Volume = 1 cm³
Substituting into the formula, we have;
[tex]Density = \frac{2.7}{1}[/tex]
Density = 2.7 g/cm³
HELPPP ILL GIVE BRAINLIST
Answer:
1= Kidneys
2= Ureters
3=Bladders
4=Urethra
Explanation:
Functions of kidney: Regulations of water balances, excretions of nitrogenous wastes(urea)
Functions of Liver: Detoxifications, protein synthesis
Functions of Skin: Temperature regulations, Metabolic functions, Excretion
Functions of lungs: Respiration, Water balance regulations
Tip: If you want faster and correct answers you should label your questions under the correct subject.
A 75.0 kg man pushes backward on a 300.0 kg boat with a force of 150.0N causing the boat to accelerate backward at 0.5m/s^2. What is the acceleration of the man?
A) 150.0 m/s^2
B) 8.00 m/s^2
C) 2.00 m/s^2
D) 4.00 m/s^2
Answer:
C) 2.00 m/s^2
Explanation:
F = m*a
150N = 75kg(a)
a = 150N/75kg
a = 2.0m/s²
DO U KNOW CARRYMINATI
which of the following items has the most inertia while at rest
Answer:
wats the following items
Behaviors in deer such as herding and male deer using antlers to compete for females increase the chances of successful reproduction.
True or False
Answer:
True
Explanation:
The reproductive success of any species is the capability to produce their offspring per breeding lifetime or event.
Most of the species have to attract their partners by their physical capability and build up so that the mother can choose her partner in order to breed the best kind of off spring.
In the context, in case of deer, the size of the their antlers as well as behavior in herding is considered as the best chances for a successful reproduction to compete among the males and find their breeding mate.
Thus the answer is TRUE.
The dependent variable measured was the ______
a. fan speed
b. mass
c. acceleration
Answer:
a
Explanation:
Fan speed is the answer
Two parallel circular rings of radius R have their centres in the X axis separated by a distance L. If each ring carries a uniformly distributed charge Q,find the electric field at points along the X axis
Answer:
E" = Q/4πε₀√[(x² + R²)]³(x - (L - x)/√[(L - 2x)L/(x² + R²) + 1]³})
Explanation:
The electric field due to a charged ring of radius R at a distance x from the center of the ring when the axis of the ring is located on the x - axis is
E = Qx/4πε₀[√(x² + R²)]³
Since the rings are separated by a distance L, the electric field at point x due to the second ring is E' = -Q(L - x)/4πε₀[√((L - x)² + R²)]³. It is negative since it points in the negative x - direction.
So, the resultant electric field at x is E" = E + E' = Qx/4πε₀[√(x² + R²)]³ + {-Q(L - x)/4πε₀[√((L - x)² + R²)]³}
E" = Qx/4πε₀√[(x² + R²)]³ - Q(L - x)/4πε₀√[((L - x)² + R²)]³
E" = Q/4πε₀(x/√[(x² + R²)]³ - (L - x)/√[((L - x)² + R²)]³})
E" = Q/4πε₀(x/√[(x² + R²)]³ - (L - x)/√[(L² - 2Lx + x² + R²)]³})
E" = Q/4πε₀(x/√[(x² + R²)]³ - (L - x)/√[(L - 2x)L + (x² + R²)]³})
E" = Q/4πε₀√[(x² + R²)]³(x - (L - x)/√[(L - 2x)L/(x² + R²) + 1]³})
So, the electric field at points along the x axis is
E" = Q/4πε₀√[(x² + R²)]³(x - {(L - x)/√[(L - 2x)L/(x² + R²) + 1]³})
The unit of area is a derived unit. Why?
Explanation:
area=length(m) ×breadth(m) . The unit of area is expressed in terms of fundamental units m^2.thus it is derived unit
If the amplitude of a sound wave is increased by a factor of four,how does the energy carry by the sound wave in each time interval change?
Answer:
The energy will be increased by a factor 16
Explanation:
Mathematically, we have it that the energy carried by the sound wave is directly proportional to the square of the amplitude
So we have it that;
E = k * A^2
where E is the wave energy
K is the constant value
A is the amplitude value
So;
If E1 = k * (A1)^2
E2 = k * (A2)^2
But A2 = 4A1
E2 = k * (4A1)^2
E2 = k * 16(A1)^2
Divide E2 by E1
E2/E1 = k/k * 16(A1)^2/(A1)^2
E2/E1 = 16
E2 = 16 * E1
so simply, the energy will be increased by a factor of 16
when a car drives in a circle there must be ?
no net force axting on it
Answer:
I think none of above
Explanation:
hioe it's right answer
A sled with mass 11.00 kg moves in a straight line on a frictionless horizontal surface. At one point in its path, its speed is 4.00 m/s; after it has traveled a distance 3.00 m beyond this point, its speed is 7.00 m/s. Use the work-energy theorem to find the force acting on the sled, assuming that this force is constant and that it acts in the direction of the sled's motion.
Answer:
The magnitude of the force acting on the sled is 60.5 newtons.
Explanation:
The Work-Energy Theorem states that the work done by the external force applied on the sled ([tex]W[/tex]), in joules, is equal to the change of its translational kinetic energy ([tex]\Delta K[/tex]), in joules:
[tex]W = \Delta K[/tex] (1)
By definitions of work and translational kinetic energy we expand the equation above:
[tex]F\cdot s = \frac{1}{2}\cdot m\cdot (v_{2}^{2}-v_{1}^{2})[/tex] (1b)
Where:
[tex]F[/tex] - External force applied on the sled, in newtons.
[tex]s[/tex] - Travelled distance, in meters.
[tex]v_{1}, v_{2}[/tex] - Initial and final velocities, in meters per second.
If we know that [tex]m = 11\,kg[/tex], [tex]v_{1} = 4\,\frac{m}{s}[/tex], [tex]v_{2} = 7\,\frac{m}{s}[/tex] and [tex]s = 3\,m[/tex], then the external force applied on the sled is:
[tex]F = \frac{m\cdot (v_{2}^{2}-v_{1}^{2})}{2\cdot s}[/tex]
[tex]F = \frac{(11\,kg)\cdot \left[\left(7\,\frac{m}{s} \right)^{2}-\left(4\,\frac{m}{s} \right)^{2}\right]}{2\cdot (3\,m)}[/tex]
[tex]F = 60.5\,N[/tex]
The magnitude of the force acting on the sled is 60.5 newtons.
What is an example of a series circuit
Answer:
Explanation
The most famous and common example is Christmas tree lights. You can't tell easily by looking at them whether they are in series or parallel. But you sure know the difference when one of them burns out. When that happens, the whole string goes dead. No matter what you do (other than find out which bulb burned out) will not fix the problem.
Another example is anything that is temperature controlled. For example a furnace is controlled by a thermostat. When the room temperature reaches a certain point, the thermostat is constructed in a certain way so that it forms an open circuit and no current can flow through it. The furnace motor turns off and the furnace stops pumping hot air into a room.
Which statement describes how chemical formulas, such as H20, represent compounds?
Answer:
They show the elements that make up a compound.
They show the three-dimensional shape of a molecule.
They show the types of atoms that make up a molecule.
They show the number of each type of atom in a molecule.
Explanation:
❣️(◍Jess bregoli◍)❣️#keep learning!!
If a serve hits the net, what happens?
• Re-do
• Dead Ball
• Other teams point
• Play the ball
Answer:
Depends: Is it tennis or volleyball?
Explanation:
If it's volleyball, it's C, the other teams point.
If it's tennis, it's A, you get a re-do.
What is kinetic and potential energy?
Answer:
the energy produced in a body due to its motion is kinetic energy.
energy produced in a body due to its position is potential energy.
Explanation:
kinetic energy is the energy possessed by a body in motion
Potential energy is the energy possessed by a body by virtue of its position with respect to a reference level
Please help!!!!! I will give brainliest. Describe four examples of acceleration you see during your day. Choose an object that is slowing down, one that is speeding up, one that is moving at a constant speed but changing direction, and one that is moving at a constant velocity with zero acceleration.
When the brake is applied to the car and comes to rest after some time is an example of an object that is slowing down.
What is acceleration?The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
1. When the brake is applied to the body and comes to rest after some time is an example of an object that is slowing down.
2. When a person accelerates the car and the velocity is increasing is an example of speeding up.
3. An object moves in a circular motion moving at a constant speed but changing direction,
4. Acceleration is the rate of change of velocity. If the change in the velocity is constant the acceleration is zero is an example of moving at a constant velocity with zero acceleration.
To learn more about acceleration, refer to the link;
https://brainly.com/question/2437624
#SPJ1
Which of these is untrue about ray diagrams?
A. The arrowheads show the direction of the light
B. Lines must always be straight
C. More arrowheads on lines mean a brighter light
Answer:
The untrue option is C: "More arrowheads on lines mean a brighter light"
Explanation:
Ray diagrams are used to show how the light behaves with things like mirrors or lenses. Where we only study how the direction of the light changes when it interacts with these objects.
The "light" is represented with arrows, where again, the only thing we care is the direction of the light, so the first statement is true, the arrowheads show the direction of the light, and only that.
The intensity of the light, in this context, has no effect on how light behaves, so there is not a necessity of representing the intensity of the light, thus, more arrowheads on lines do not mean a brighter light. It may only be used to represent changes in direction of the light.
Finally, we know that light travels in straight pats (the pats can be curved in some cases, like with large gravitational fields, but this is not the case of a ray diagram) so the lines that represent the light should always be straight, thus option B is also true.
The untrue option is C: "More arrowheads on lines mean a brighter light"
QUESTION 30 A tennis ball moves back and forth 10 times in 5 sec. The frequency of its motion is
Answer:
so in 1 sec 2 times
so frequency = 2
Explanation:
A cell has an emf of 1.5 V and an internal resistance of 0.65 Q.
The cell is connected to a resistor R.
[0[8].[4] State what is meant by an emf of 1.5 V.
[2 marks]
I
[0] 8]-[2] The current in the circuit is 0.31 A.
Show that the total power output of the cell is approximately 0.47 W.
[1 mark]
[o[s).[3] Calcutate the energy dissipated per second in resistor R.
[2 marks]
energy dissipated per second = Ist
[o[si.[4] The cell stores 14 kJ of energy when it is fully charged. The cell's emf and internal resistance are constant as the cell f discharged.
Calculate the maximum time during which the fully-charged cell can deliver energy to
resistor R.
[2 marks)
maximum time = 5
Answer:
14000 J / 0.40 J/s = 35 000 s or about 9.75 hrs
Change the following as indicated in the brackets.
8m (km,cm)
metres to kilometres = 1/1000
8 m ⇒ 0.008 km
metres to centimetres = × 100
8 m ⇒ 800 cm
Answer:
1000m=1km
so, 8m=8/1000 = 0.008km
1m=100cm
so, 8m=8×100=800
The
push switch is closed and the door unlocks. Explain in detail how this happens.
Answer:
The push switch is closed and the door unlocks. ... The switch completes the circuit and a current flows through the coil. The coil becomes an electromagnet and its iron core becomes magnetised. The iron bolt is attracted to the electromagnet.
Explanation:
Please Mark me brainliest
(Please help if you can, I need this last answer done by tonight.)
Use the universal law of gravitation to solve the following problem.
Hint: mass of the Earth is = 5.97 x 1024 kg
A scientific satellite of mass 1300 kg orbits Earth 200 km above its surface. If Earth has a radius of 6378 km, what is the force of gravity acting on the scientific satellite?
a. Write out the formula for this problem.
b. Plug in the values from this problem into the formula.
c. Solve the problem, writing out each step.
d. Correct answer
Answer:
a.
[tex]F =G \cdot \dfrac{M \cdot m}{r^{2}}[/tex]
b.
[tex]F =6,378 \times 10^{-11} \times \dfrac{5.97 \times 10^{24} \times 1,300}{6,578^{2}}[/tex]
c.
[tex]F =6,378 \times 10^{-11} \times \dfrac{5.97 \times 10^{24} \times 1,300}{6,578^{2}} = \dfrac{9.519165 \times 10^{18}}{832117} \approx 1.144 \times 10^{13}[/tex]
d. 1.144 × 10¹³ N
Explanation:
The universal law of gravitation is presented as follows;
[tex]F =G \cdot \dfrac{M \cdot m}{r^{2}}[/tex]
The given mass of the scientific satellite, m = 1,300 kg
The height of the orbit of the satellite, r = 200 km above the Earth's surface
The length of the radius of the Earth, R = 6378 km
The mass of the Earth = 5.97 × 10²⁴ kg
a. The formula for the universal law of gravitation is presented as follows;
[tex]F =G \cdot \dfrac{M \cdot m}{r^{2}}[/tex]
Where;
M = The mass of the Earth = 5.97 × 10²⁴ kg
m = The mass of the satellite = 1,300 kg
r = The distance between the Earth and the satellite = R + r = 6,378 km + 200 km = 6,578 km
G = The Gravitational constant = 6.67430 × 10⁻¹¹ N·m²/kg²
b. Plugging in the values from the problem into the formula gives;
[tex]F =6,378 \times 10^{-11} \times \dfrac{5.97 \times 10^{24} \times 1,300}{6,578^{2}}[/tex]
c. Solving gives;
[tex]F =6,378 \times 10^{-11} \times \dfrac{5.97 \times 10^{24} \times 1,300}{6,578^{2}} = \dfrac{9.519165 \times 10^{18}}{832117} \approx 1.144 \times 10^{13}[/tex]
The force acting between the Earth and the satellite, F ≈ 1.144 × 10¹³ N
d. 1.144 × 10¹³ N
