1. The manufacturer of the vinegar used in the experiment stated that the vinegar contained 5.0% acetic acid. What is the percent error between your result and the manufacturer statement

Answers

Answer 1

Answer:

72.8 % (But verify explanation).

Explanation:

Hello,

In this case, with the following obtained results, the percent error is computed as follows:

Volume of vinegar= 7.0 mL

Volume of NaOH= (7+6.6+6.4)/3= 6.7 mL

Used concentration of NaOH= 1.5M

Concentration of acetic acid= (concentration of NaOH*volume of NaOH)/volume of vinegar= (6.7mL*1.5M)/7.0M= 1.44M

Assuming we have 100 mL (0.100L) of vinegar, moles of acetic acid in vinegar = 1.44M x 0.100 L= 0.144 mol

Mass of acetic acid in 100g of vinegar = 0.144 mol x 60.0g/mol= 8.64 g

% of acetic acid in vinegar=8.64 %

% error in percentage of acetic acid = [(8.64% - 5.0%)/5.0] x 100=72.8 %

Clearly, this result depend on your own measurements, anyway, you can change any value wherever you need it.

Regards.


Related Questions

The combination of a carbonyl group and a hydroxyl group on the same carbon atom is called a ________ group.

a. carbamate group
b. carbonate
c. carboxlate
d. carboxyl

Answers

Answer:

d. carboxyl

Explanation:

The presence of carbonyl group (>C=O)) and a hydroxyl group ( (−OH) on the same carbon atom is called a "carboxyl" group. A carboxyl group is represented as COOH and acts as the functional group part of carboxylic acids.

For example:

Formic acid or Methanoic acid (H-COOH)  Butanoic acid (C3H7-COOH)

Hence, the correct option is "d. carboxyl ".

The second law of thermodynamics predicts that heat flow from a cooler object to a hotter object:________
a) will be spontaneous at high pressure
b) will be spontaneous at low pressure
c) will never be spontaneous at any pressure
d) will always be spontaneous

Answers

Answer:

c) will never be spontaneous at any pressure.

Explanation:

Hello,

In this case, we need to remember that the second law of thermodynamics states that heat flow is transferred from a hot object to a cold object only, never the other way around, therefore, the answer is c) will never be spontaneous at any pressure. This is supported by driving force that in this case is the temperature difference which must be negative for the hot object (it gets eventually cold) and positive for the cold object (it gets eventually hot) until they reach the equilibrium temperature.

Best regards.

Calculate LaTeX: \DeltaΔGº for a voltaic cell with Eºcell = +0.24 V if the overall reaction involves a 3 electron reduction.

Answers

Answer:

-69 kJ

Explanation:

Step 1: Given data

Standard cell potential (E°cell): +0.24 V

Electrons involved (n): 3 mol

Step 2: Calculate the standard Gibbs free energy change (ΔG°) for the voltaic cell

We will use the following expression.

ΔG° = -n × F × E°cell

where,

F is Faraday's constant (96,485 C/mol e⁻)

ΔG° = -n × F × E°cell

ΔG° = -3 mol e⁻ × 96,485 C/mol e⁻ × 0.24 V

ΔG° = -69 kJ

Determine whether the following statement about reaction rates is true or false. If the statement is false, select the reason why?

Increasing the temperature of a reaction system decreases the activation energy of the reaction.

Answers

Answer:

False

Explanation:

Reaction rates is a field under chemical kinetics that deals with the measure of speed of a chemical reaction. It is the change in the concentration of a reactant or product per unit time.

Activation Energy is a theory been  put forward to explain why different chemical reactions proceed at different rates.

Activation Energy theory postulates that for a reactant to transform into a product , the colliding particles or molecules of the reactant must possess a certain amount of energy so as to overcome the reaction barrier.

An important factor which may influence the attainment of activation energy by colliding particles of reactants is the temperature at which the reaction is carried out. The higher the temperature, the  greater is the fraction of the reactant particles which possess the activation energy and thus the faster the reaction becomes. SO , in essence increasing the temperature of a reaction system do not decreases the activation energy of the reaction but rather also increases  the activation energy of the reaction.

Will a precipitate (ppt) form when 300. mL of 2.0 × 10 –5 M AgNO 3 are added to 200. mL of 2.5 × 10 –9 M NaI? Answer yes or no, and identify the precipitate if there is one

Answers

Answer:

A precipitate will form, AgI

Explanation:

When Ag⁺ and I⁻ ions are in an aqueous media, AgI(s), a precipitate, is produced or not based on its Ksp expression:

Ksp = 8.3x10⁻¹⁷ = [Ag⁺] [I⁻]

Where the concentrations of the ions are the concentrations in equilibrium

For actual concentrations of a solution, you can define Q, reaction quotient, as:

Q = [Ag⁺] [I⁻]

If Q > Ksp, the ions will react producing BaCO₃, if not, no precipitate will form.

Actual concentrations of Ag⁺ and I⁻ are:

[Ag⁺] = [AgNO₃] = 2.0x10⁻⁵ × (300mL / 500.0mL) = 1.2x10⁻⁵M

[I⁻] = [NaI] = 2.5x10⁻⁹ × (200mL / 500.0mL) = 1.0x10⁻⁹M

500.0mL is the volume of the mixture of the solutions

Replacing in Q expression:

Q = [Ag⁺] [I⁻]

Q = [1.2x10⁻⁵M] [1.0x10⁻⁹M]

Q = 1.2x10⁻¹⁴

As Q > Ksp

A precipitate will form, AgI

For the following reaction, 22.8 grams of diphosphorus pentoxide are allowed to react with 13.5 grams of water . diphosphorus pentoxide(s) water(l) phosphoric acid(aq) What is the maximum mass of phosphoric acid that can be formed

Answers

Answer:

[tex]m_{H_3PO_4}=31.5gH_3PO_4[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]P_2O_5(s)+3H_2O(l)\rightarrow 2H_3PO_4(aq)[/tex]

Thus, since the diphosphorus pentoxide to water molar ratio is 1:3 and we are given the mass of both of them, for the calculation of the maximum mass phosphoric acid that is yielded, one could first identify the limiting reactant, for which we compute the available moles of diphosphorus pentoxide (molar mass 142 g/mol):

[tex]n_{P_2O_5}=22.8gP_2O_5*\frac{1molP_2O_5}{142gP_2O_5}=0.161molP_2O_5[/tex]

And the moles of diphosphorus pentoxide that are consumed by 13.5 g of water (molar mass 18 g/mol):

[tex]n_{P_2O_5}^{consumed}=13.5gH_2O*\frac{1molH_2O}{18gH_2O}*\frac{1molP_2O_5}{3molH_2O} =0.25molP_2O_5[/tex]

Hence, since less moles of diphosphorus pentoxide are available, we sum up it is the limiting reactant, therefore, the maximum mass of phosphoric acid (molar mass 98 g/mol) is computed by considering the 1:2 molar ratio between them as follows:

[tex]m_{H_3PO_4}=0.161molP_2O_5*\frac{2molH_3PO_4}{1molP_2O_5} *\frac{98gH_3PO_4}{1molH_3PO_4} \\\\m_{H_3PO_4}=31.5gH_3PO_4[/tex]

Regards.

Wine goes bad soon after opening because the ethanol dissolved in it reacts with oxygen gas to form water and aqueous acetic acid , the main ingredient in vinegar. Calculate the moles of oxygen needed to produce of acetic acid. Be sure your answer has a unit symbol, if necessary, and round it to significant digits.

Answers

Answer:

0.500 moles of oxygen

Explanation:

Full question says: "Calculate the moles of oxygen needed to produce 0.500 moles of acetic acid.

The reaction of ethanol (C₂H₅OH) with oxygen (O₂) is:

C₂H₅OH + O₂ → CH₃COOH + H₂O

Where 1 mole of ethanol reacts per mole of oxygen to produce 1 mole of acetic acid (CH₃COOH) and 1 mole of water

Based on the chemical equation (1 mole of oxygen produce 1 mole of acetic acid; Ratio 1:1). Thus, if you want to produce 0.500 moles of acetic acid you will need:

0.500 moles of oxygen

Methyl iodide reacts irreversibly with azide ion with rate = k[CH3I][N3–]. CH3I(aq) + N3–(aq) → CH3N3(aq) + I–(aq) The reaction is carried out with an initial concentration of CH3I of 0.01 M. Which statement about the reaction is correct?

Answers

Answer:

(D) The reaction cannot take place in a single elementary step

Explanation:

Statements are:

(A) The time it takes for [CH3I] to decrease to 0.005 M is independent of [N3-], as long as [N3] >> [CH3I].

B) If the initial concentrations of azide and CH3I are equal, then it takes half as long for [CH3I] to decrease to 0.005 M as it does for it to decrease from 0.005 M to 0.0025 M.

(C) The reaction rate is significantly smaller if excess I- is added to the solution.

(D) The reaction cannot take place in a single elementary step.

The rate of the reaction is:

rate = k[CH3I][N3–].

That means rate depends of concentration of CH₃I as much as N₃⁻ concentration

(A) The time it takes for [CH3I] to decrease to 0.005 M is independent of [N3-], as long as [N3] >> [CH3I]. FALSE. The reaction rate depends of N₃⁻ as much as CH₃I

B) If the initial concentrations of azide and CH3I are equal, then it takes half as long for [CH3I] to decrease to 0.005 M as it does for it to decrease from 0.005 M to 0.0025 M. FALSE. Reaction is second-order. Half-life is 1/K[A]₀. If initial concentration is 0.1M, to a concentration of 0.005M it takes:

1/K*0.1. If initial concentration is 0.005M it takes 1/K*0.005. That means it takes half to decrease from 0.005M to 0.0025 as it does for it to decrease from 0.01M to 0.005M.

(C) The reaction rate is significantly smaller if excess I- is added to the solution. FALSE. Reaction rate is independent of I⁻

(D) The reaction cannot take place in a single elementary step. TRUE. As this reaction is a single-replacement reaction implies the formation  of 1 C-N bond. But also the rupture of the C-I bond is impossible to explain this kind of reaction in a single elementary step.

A student completed the experiment but found that the total amount of material recovered weighed more than the original sample. What is the most likely source of error and how may it be corrected?

Answers

Answer:

This is due to the water moisture present in the recovered sample.

Explanation:

The total amount of material recovered isn’t meant to weigh more than the original sample. However when this happens then it means there is the presence of water moisture in the recovered sample.

The recovered samples however needs to be heated to make it dry and eliminate the water moisture through evaporation.

In a buffer solution made of acetic acid and sodium acetate, if a small amount of acid is added, the added acid will react with whome?

Answers

Answer:

The acid reacts with the conjugate base producing more weak acid.

Explanation:

A buffer solution is defined as the mixture of a weak acid and its conjugate base or a weak base with its conjugate acid.

The acetic buffer, CH₃COOH/CH₃COO⁻, is in equilibrium with water as follows:

CH₃COOH(aq) + H₂O(l) ⇄ CH₃COO⁻(aq) + H₃O⁺

When an acid HX (Source of H₃O⁺) is added to the buffer, the reaction that occurs is:

CH₃COO⁻ + HX → CH₃COOH

The acid reacts with the conjugate base producing more weak acid.

In fact, this is the principle of the buffer:

An acid reacts with the conjugate base producing weak acid. And the weak acid reacts with a base producing conjugate base

If a small amount of acid is added to an acetic acid-sodium acetate buffer, the acid will react with the acetate ion from sodium acetate.

We have a buffer formed by acetic acid and sodium acetate.

What is a buffer?

A buffer is a solution used to resist abrupt changes in pH when an acid or a base is added.

How are buffers formed?

They can be formed in 1 of 2 ways:

By a weak acid and its conjugate base.By a weak base and its conjugate acid.

Our buffer is formed by a weak acid (acetic acid) and its conjugate base (acetate ion from sodium acetate).

When an acid (HX) is added, it is neutralized by the basic component of the buffer. The generic net ionic equation is:

H⁺ + CH₃COO⁻ ⇄ CH₃COOH

If a small amount of acid is added to an acetic acid-sodium acetate buffer, the acid will react with the acetate ion from sodium acetate.

Learn more about buffers here: https://brainly.com/question/24188850

A student ran the following reaction in the laboratory at 242 K: 2NOBr(g) 2NO(g) Br2(g) When she introduced 0.143 moles of NOBr(g) into a 1.00 liter container, she found the equilibrium concentration of NOBr(g) to be 0.108 M. Calculate the equilibrium constant, Kc, she obtained for this reaction. Kc

Answers

Answer:

1.84 × 10⁻³

Explanation:

Step 1: Write the balanced equation

2 NOBr(g) ⇄ 2 NO(g) + Br₂(g)

Step 2: Calculate the initial concentration of NOBr

0.143 moles of NOBr(g) are introduced into a 1.00 liter container. The molarity is:

M = 0.143 mol / 1.00 L = 0.143 M

Step 3: Make an ICE chart

         2 NOBr(g) ⇄ 2 NO(g) + Br₂(g)

I             0.143               0           0

C              -2x               +2x        +x

E          0.143-2x            2x          x

Step 4: Find the value of x

The equilibrium concentration of NOBr(g) was 0.108 M. Then,

0.143-2x = 0.108

x = 0.0175

Step 5: Calculate the concentrations at equilibrium

[NOBr] = 0.108 M

[NO] = 2x = 0.0350 M

[Br₂] = x = 0.0175 M

Step 6: Calculate the equilibrium constant (Kc)

Kc = [0.0350]² × [0.0175] / [0.108]²

Kc = 1.84 × 10⁻³

All of the following are examples of allotropes of carbon EXCEPT Choose the one alternative that best completes the statement or answers the question. Choose the one alternative that best completes the statement or answers the question. diamond amorphous carbon quartz graphene all of the above

Answers

Answer:

quartz

Explanation:

The correct option would be quartz.

Allotropy is a phenomenon that describes the natural existence of the same element in different forms with different physical characteristics. Allotropes are therefore different forms of the same element.

Carbon as an element has several allotropes which include diamond, graphite, graphene, amorphous carbon, and fullerenes. Quartz is a crystalline solid that is composed of silicon dioxide and not carbon.

Hence, all the options are carbon allotropes except quartz.

Which element always exists in monatomic form? silicon, a metalloid oxygen, a nonmetal calcium, a metal neon, a noble gas

Answers

Answer:

[tex]\huge\boxed{A \ noble \ gas}[/tex]

Explanation:

A noble gas always exists in a mono-atomic form. This is because the valency of noble gas is zero and thus they don't tend to lose, gain or share electrons. They are inert gases and do not react.

Answer:

a noble gas

Explanation:

the the noble gases exist as mono atomic elements that is helium, neon ,argon, Krypton,etc.

mono atomic elements exist as stable single atoms

If the amount of radioactive iodine-123, used to treat thyroid cancer, in a sample decreases from 3.2 to 0.4 mg in 39.6 h, what is the half-life of iodine-123?

Answers

Answer:

Half life = 13.197 hour

Explanation:

Given:

Old amount (A₀) = 3.2

New amount (A) = 0.4

Radiation decay time (t) = 39.6 hour

Half life = T(1/2)

Find:

Half life = T(1/2) = T

Computation:

A = A₀[tex]e^{-(\frac{0.693t}{T} )}[/tex]

[tex]e^{-(\frac{0.693t}{T} )}[/tex] = 0.4 / 3.2

-[27.4428 / T] = In (0.125)

-[27.4428 / T] = -2.0794

[27.4428 / T] = 2.0794

T = 13.197

Half life = 13.197 hour

2. Which one is the odd one
out and why?
o Water
• Hydrogen
Chlorine
o Aluminum

Answers

Answer:

Reaction of Chlorine with Hydrogen Chlorine and Hydrogen mixed together explodes when exposed to sunlight, which produces Hydrogen Chloride. In the dark away from sunlight, no reaction occurs, so light energy is required for a reaction. Cl2 + H2 = 2 HCl Reaction of Chlorine with Non-Metals Chlorine directly combines with most non-metals.

Explanation:

I hope this helps bro

Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.

Answers

Answer:

ELECTROLYTIC CELL

An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.

EXAMPLE

Nelsons cell and Downs cell

VOLTAIC CELL OR GALVANIC CELL

The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.

EXAMPLE

Daniel cell

Explanation:

Electrolytic cell by the non-spontaneous reactions covert the chemical energy into electical and volataic cells are those in which spontaneous redox reaction takes place.

What is cell?

Cell is a device which converts chemical energy into electrical energy.

Electrolytic Cell: An electrolytic cell is an electrochemical cell in which a non-spontaneous redox chemical reaction occurs when an electric current is conducted through the solution.

Example- Electrolysis of sodium chloride, by which formation of sodium metal and chlorine gas takes place.

Voltaic cell: Voltaic cells are electrochemical cells in which a spontaneous redox chemical reaction occurs and creates electric current. These cells are also known by the name of Galvanic cells.

Example- It is used in the form of batteries which can be portable easily.

Hence, in electrolytic cells non - spontaneous reaction occur and in voltaic cell spontaneous reaction is occured.

To know more about cells, visit the below link:

https://brainly.com/question/1172236

#SPJ2

An atom of 108Te has a mass of 107.929550 amu. Calculate the binding energy per MOLE in kJ. Use the values: mass of 1H atom

Answers

Answer:

The binding energy = 8.64972649×10¹⁰ kJ/mole

Explanation:

Given that:

An atom of 108Te has a mass of 107.929550 amu.

In a 108 Te atom, there are 52 protons and 56 neutrons

where;

mass of proton= 1.007825 amu

mass of neutron= 1.008665 amu

Similarly; The atomic number of Te = 52

the mass of 52 protons = 52 ×  1.007825  amu

the mass of 52 protons = 52.4069 amu

the mass of 56 neutrons = 56 ×  1.008665 amu

the mass of 56 neutrons = 56.48524 amu

The total mass can now be = the mass of 52 protons + the mass of 56 neutrons

The total mass = 52.4069 amu +  56.48524 amu

The total mass = 108.89214  amu

Recall  : it is given that An atom of 108Te has a mass of 107.929550 amu.

Therefore, the mass defect will be = 108.89214  amu - 107.929550 amu

the mass defect = 0.96259amu

where 1 amu = 1.66× 10⁻²⁷ kg

Therefore, 0.96259amu = (0.96259  × 1.66× 10⁻²⁷) kg

= 1.5978994 × 10⁻²⁷kg

The binding energy = mass defect × (speed of light)²

where;

speed of light c = 2.99792 × 10⁸ m/s

The binding energy = 1.5978994 × 10⁻²⁷kg  ×  2.99792 × 10⁸ m/s

The binding energy = 1.43611597 × 10⁻¹⁰  J

The binding energy =  1.43611597 × 10⁻¹³ kJ/atom

since 1 mole = 6.023 × 10²³ atom (avogadro's constant)

Then;

The binding energy = ( 1.43611597 × 10⁻¹³ )× (6.023 × 10²³)  kJ/mole

The binding energy = 8.64972649×10¹⁰ kJ/mole

What is the relationship between concentration and rate of reaction?
not related
directly proportional
Inversely proportional
partially related

Answers

Explanation:

The answer is directly proportional, because when there is more concentration their will more reactants to react fast diring the chemical reaction which increases the rate of chemical reaction.

So, we can state that the relationship between them are directly proportional.

Hope it helps...

An enzyme is discovered that catalyzes the chemical reaction:SAD -------->HAPPY
<-------A team of motivated researchers sets out to study the enzyme which they call Happyase. They find that the Kcat for happyase is 600s-1. They carry out several experiments. When [Et]=20 nM and [SAD]=40 \mu M, the reaction velocity, Vo is 9.6 \mu Ms^{-1} . Calculate the Km for the substrate SAD.

Answers

Answer: Km = 10μM

Explanation: Michaelis-Menten constant (Km) measures the affinity a enzyme has to its substrate, so it can be known how well an enzyme is suited to the substrate being used. To determine Km another value associated to an eznyme is important: Turnover number (Kcat), which is the number of time an enzyme site converts substrate into product per unit time.

Enzyme veolcity is calculated as:

[tex]V_{0} = \frac{E_{t}.K_{cat}.[substrate]}{K_{m}+[substrate]}[/tex]

where Et is concentration of enzyme catalitic sites and has to have the same unit as velocity of enzyme, so Et = 20nM = 0.02μM;

To calculate Km:

[tex]V_{0}*K_{m} + V_{0}*[substrate] = E_{t}.K_{cat}.[substrate][/tex]

[tex]K_{m} = \frac{E_{t}.K_{cat}.[substrate]-V_{0}*[substrate]}{V_{0}}[/tex]

[tex]K_{m} = \frac{0.02*600*40-9.6*40}{9.6}[/tex]

Km = 10μM

The Michaelis-Menten for the substrate SAD is 10μM.

How many valence electrons must two atoms share to form a single covalent bond? answers A.2 B.4 C.3 D.1

Answers

Answer:

2

Explanation:

A single covalent bond is formed when two electrons are shared between the same two atoms, one electron from each atom.

Answer:

the answer is 2

Explanation:

A compound is found to contain 30.45 % nitrogen and 69.55 % oxygen by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 46.01 g/mol. What is the molecular formula for this compound?

Answers

Answer:

Empirical formulae is NO2

Molecular Formulae is NO2

Why are cells important to an organisms survival

Answers

Answer:

Cells are the basic structures of all living organisms. Cells provide structure for the body, take in nutrients from food and carry out important functions. ... These organelles carry out tasks such as making proteins?, processing chemicals and generating energy for the cell

Answer: I absolutely love this question! Biology is so interesting, so I always love to answer the curiosity of others regarding biology, such as that!

Cells are simply the basic structures of all organisms, that are living, of course! Cells provide structure for the body, and they also take in nutrients that your body needs from food and they carry out important functions. These organelles carry out tasks such as making proteins, processing chemicals, and generating energy for the cell. Isn’t that cool?

Hope this helped! <3

A spontaneous galvanic cell consists of a Pb electrode in a 1.0 M Pb(NO3)2 solution and a Cd electrode in a 1.0 M Cd(NO3)2 solution. What is the standard cell potential for this galvanic cell

Answers

Answer:

0.27 V

Explanation:

Given that the both half cells contain 1.0 molar solutions of their respective electrolytes.

E°Pb= -0.13 V

E°Cd = -0.40 V

Since it is a galvanic cell, the electrode having a more negative electrode potential will serve as the anode and the electrode having a less negative electrode potential will serve as the cathode.

Hence cadmium will serve as the anode and lead will serve as the cathode.

E°cell = E°cathode - E°anode

E°cell = -0.13 - (-0.40)

E°cell = 0.27 V

One hundred fifty joules of heat are removed from a heat reservoir at a temperature of 150 K. What is the entropy change of the reservoir (in J/K)?

Answers

Answer:

ΔS surrounding (entropy change of the reservoir) = -1 J/K

Explanation:

Given:

Change in heat (ΔH) = 150 joules

Temperature (T) = 150 K

Find:

ΔS surrounding (entropy change of the reservoir)

Computation:

ΔS surrounding (entropy change of the reservoir) = - ΔH / T

ΔS surrounding (entropy change of the reservoir) = - 150 / 150

ΔS surrounding (entropy change of the reservoir) = -1 J/K

In which pair do both compounds exhibit predominantly ionic bonding? A) KCl and CO2 B) SO2 and BaF2 C) F2 and N2O D) N2O3 and Rb2O E) NaF and SrO

Answers

Answer:

E) NaF and SrO

Explanation:

The ionic bonding occurs between atoms with a great difference in electronegativity. This usually happens between a metal and a non-metal.

In which pair do both compounds exhibit predominantly ionic bonding?

A) KCl and CO₂. NO. C and O are non-metals and present covalent bonding.

B) SO₂ and BaF₂. NO. S and O are non-metals and present covalent bonding.

C) F₂ and N₂O. NO. Both compounds contain non-metals and present covalent bonding.

D) N₂O₃ and Rb₂O. NO. N and O are non-metals and present covalent bonding.

E) NaF and SrO. YES. Na and Sr are metals while F and O are non-metals.

. You have two solutions, both with a concentration of 0.1M. Solution A contains a weak acid with a pKa of 5. ThepH of solution A is 3. Solution B contains a weak acid with a pKa of 9. The pH of solution B is:

Answers

Answer:

pH of solution B is 5

Explanation:

A weak acid, HA, is in equilibrium with water as follows:

HA(aq) + H₂O(l) ⇄ A⁻(aq) + H₃O⁺(aq)

Where Ka (10^-pKa = 1x10⁻⁹) is:

Ka = 1x10⁻⁹ = [A⁻] [H₃O⁺] / [HA]

Where concentrations of this species are equilibrium concentrations

As initial concentration of HA is 0.1M, the equilibrium concentrations of the species are:

[HA] = 0.1M - X

[A⁻] = X

[H₃O⁺] = X

Where X is the amount of HA that reacts until reach the equilibrium, X is reaction coordinate.

Replacing in Ka expression:

1x10⁻⁹ = [A⁻] [H₃O⁺] / [HA]

1x10⁻⁹ = [X] [X] / [0.1 - X]

1x10⁻¹⁰ - 1x10⁻⁹X = X²

1x10⁻¹⁰ - 1x10⁻⁹X - X² = 0

Solving for X:

X = -0.00001 → False solution, there is no negative concentrations.

X = 1x10⁻⁵ → Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 1x10⁻⁵M

And pH = -log[H₃O⁺]

pH = 5

pH of solution B is 5

Which option draws the correct conclusion from the following case study?
A patient with sickle-cell anemia and a fever goes to the emergency room and is given Tylenol to reduce
the fever. The patient has seizures and dies after taking the Tylenol. The physician writes up this case as
an interesting outcome for a patient with sickle-cell anemia.
The case study's validity is obvious because it describes a real-life situation.
The case study was influenced by bias, and led to incorrect conclusions being drawn
The case study was not intended to produce a generalized conclusion about treatment
Upon reading this case study, physicians should stop treating sickle cell patients with fevers using Tylenol

Answers

Answer:

I believe the answer The case study was influenced by bias, and led to incorrect conclusions being drawn. plz correct me if I am wrong

Explanation:

Answer: options B

Explanation:

A sample of radioactive silver contains two isotopes, 108Ag (denoted A) and 110Ag (denoted B). The second of these (B) has a half life of 24 seconds, whereas the first (A) has a half life of 2.3 minutes. If a sample contains equal numbers of each of these isotopes at the beginning of an experiment that runs for an hour, which of the following statements is correct?
A. At the end of the hour, isotope B has a greater decay constant λ than isotope A
B. At the end of the hour, isotope A has the same decay constant λ as isotope B
C. At the end of the hour, isotope A has a greater decay constant λ than isotope B

Answers

Answer:

A : At the end of the hour, isotope B has a greater decay constant λ than isotope A

Explanation:

Firstly, we need to understand that radioactive decay follows a first order rate law.

What this means is that we can calculate the radioactive decay constant using the following formula from the half-life

Mathematically;

[tex]t_{1/2}[/tex]  = 0.693/λ

where λ represents the radioactive decay constant.

Rearranging the equation, we can have

λ = 0.693/[tex]t_{1/2}[/tex]

Now, to have a fair level playing ground, it is best that the half-life of both isotopes are in the same unit of time(seconds)

For A, the half-life = 2.3 minutes which is same as 2.3 × 60 = 138 seconds

For B, the half-life is 24 seconds

Thus, at the end of the hour, the decay constant for isotope A will be;

λ = 0.693/138 = 0.0050 [tex]s^{-1}[/tex]

For isotope B, the decay constant will be;

λ = 0.693/24 = 0.028875  [tex]s^{-1}[/tex]

We can see that the decay constant of isotope B is higher than that of A at the end of the experiment

Read the chemical equation. Mg + 2HCl → MgCl2 + H2 How many moles of MgCl2 are produced from 1 mole of HCl? 0.2 0.5 1.0 1.5

Answers

Answer:

0.5 mol MgCl₂

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl → MgCl₂ + H₂

In words, 1 mole of Mg reacts with 2 moles of HCl to form 1 mole of MgCl₂ and 1 mole of H₂.

Step 2: Establish the appropriate molar ratio

The molar ratio of HCl to MgCl₂ is 2:1.

Step 3: Calculate the moles of MgCl₂ produced from 1 mole of HCl

1 mol HCl × (1 mol MgCl₂/2 mol HCl) = 0.5 mol MgCl₂

Answer:

it is 2.0, the above one is wrong

Explanation:

I did the test :

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many

Answers

The given question is incomplete.

The complete question is:

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many grams of methane were needed for the reaction?

Answer: 4 grams of methane were needed for the reaction

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.

{tex]CH_4+2O_2\rightarrow CO_2+H_2O[/tex]

Given:  mass of oxygen = 16 g

Mass of carbon dioxide = 11 g

Mass of water = 9 g

Mass of products = Mass of carbon dioxide + mass of water = 11 g  +9 g = 20 g

Mass or reactant = mass of methane + mass of oxygen = mass of methane + 16 g

As mass of reactants = mass of products

mass of methane + 16 g= 20 g

mass of methane  = 4 g

Thus 4 grams of methane were needed for the reaction

Other Questions
a company bought a piece of equipment for A200 and expects to use it for eight years. The company that plans to What word phrase can you use to represent the algebraic expression 7x?A.7 more than a number xB.the product of 7 and a number xC.the quotient of 7 and a number xD.7 less than a number x A company can shorten its cash cycle by: __________a. Reducing inventory turnover b. Reducing account payables c. Reducing days receivable d. None of the above What did the Pacific Railway Act, Homestead Act, Morrill Land Grant College Act, and National Banking Act all have in common? A 12-year capital lease specifies equal minimum annual lease payments. Part of this payment represents interest and part represents a reduction in the net lease liability. The portion of the minimum lease payment in Year 10 applicable to the reduction of the net lease liability should be: If the word ends in silent e , drop the e and add the suffix, unless the final e is needed to preserve the sound of the preceding consonant (as in vengeance ). Type the words that both end in the suffix -ance and drop the e according to the spelling rule above. explanation pls? step by step i get confused on these questions! thank you! The number 16 has four fourth roots. In other words, there are four complex numbers that can be entered in the square in the equation below: __^4 = 16 Find them. Suppose you roll a fair six-sided die 25 times. What is the probability that you roll 5 or more 6s on that die? A. 0.3883 B. 0.5937 C. 0.5 D. 0.4063 The ____ environment can greatly influence the course of human events.A. polytheismB. physicalC. GregorianD. city-stateE. artifact The following accounts are from last year's books of Sharp Manufacturing: Raw Materials Bal 0 (b) 154,800 (a) 166,000 11,200 Work In Process Bal 0 (f) 513,200 (b) 132,400 (c) 168,800 (e) 212,000 0 Finished Goods Bal 0 (g) 464,000 (f) 513,200 49,200 Manufacturing Overhead (b) 22,400 (e) 212,000 (c) 26,400 (d) 156,800 6,400 Cost of Goods Sold (g) 464,000 Sharp uses job-order costing and applies manufacturing overhead to jobs based on direct labor costs. What is the amount of direct materials used for the year In professional sports, the commissioner has discretionary power in all of the following areas except A. resolution of disputes over player compensation. B. resolution of disputes between clubs. C. approval of player contracts. D. disciplinary matters between players and clubs. E. rule making. This table represents a quadratic function.What is the value of a in the functions equation?A. -1/2B. 1/2C. 2D. 1 Find the total surface area. What is the perimeter of the figure shown? you have decided to hire a disc jockey for your party. the second dj you interviewed has 3 times as many songs as the first dj. the third dj had half as many songs as the second dj. write an expression to represent the number of songs the third has if the first dj had r songs. explain how you arrived at your answer what is the domain of f(x)=(1/4)^x Select all the correct answers. Consider what you've learned in the lesson and in part A of this activity. Which two sentences about World War I are supported by what you've learned? The Russians lacked the technology to fight successfully against more technologically advanced nations. The French were less advanced technologically and did not fight against those with better weapons. The Central Powers suffered more casualties than the British Empire and the United States. The British Empire had lower numbers of casualties because they did not fight on land, only at sea. somebody help me please A cross is performed between a bird that is homo for red feathers and a bird that is homo for blue feathers. Purple offspring result due to incomplete dominance. Then, two of the purple offspring are crossed. What proportion of the offspring from the second cross will be purple? 1 in 4 2 in 4 3 in 4 4 in 4 what makes''emerging technologies'' happen and what impact will they have on individuals,society,and environment